View Single Post
  #20 (permalink)  
Old 04-02-2007, 11:02 PM
kimiraikkonen
Guest
 
Posts: n/a
Default Re: Broadcom Wireless adapter freezes randomly

On Apr 3, 1:16 am, "kimiraikkonen" <kimiraikkone...@gmail.com> wrote:
> On Apr 3, 12:50 am, John Navas <spamfilt...@navasgroup.com> wrote:
>
>
>
>
>
> > On 2 Apr 2007 14:22:05 -0700, "kimiraikkonen"
> > <kimiraikkone...@gmail.com> wrote in
> > <1175548925.298521.280...@p77g2000hsh.googlegroups .com>:

>
> > >the values which i sent about ''ipconfig /all'' are the ''same'' when
> > >freeze happens. Also what do you want from me to send you except
> > >ipconfig /all ? Also i haven't done a binary comparision. How to do?

>
> > For now I just want the "IPCONFIG /ALL" when it "freezes".

>
> > >I haven't disabled DHCP inside my router, i just associated an IP for
> > >my wi-fi adapter, so it seems ''disabled'' due to manual IP
> > >configuration. Does it differ?

>
> > Per IPCONFIG, DHCP _is_ disabled on your wireless adapter. Why???

>
> > >I re-enable my wi-fi adapter by going ''network connections'' windows,
> > >right-click to disable, then i right-click again to enable called ''re-
> > >enabling'' wi-fi adapter(Broadcom).

>
> > You left out the Disable part. Please try not to leave stuff out.

>
> > --
> > Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
> > John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
> > Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_How_To>
> > Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>

>
> OK, i will complete your requests. (ipconfig /all when freeze).
>
> I haven't disabled DHCP for my wi-fi adapter or router. I use a static
> IP (manual IP config) and because of this DHCP seems disabled. If i
> use ''auto ip assign'' feature, it seems enabled. Additionaly, DHCP
> does not effect on my freeze problem. I run OK with these settings if
> wireless works stable.
>
> Also i want to ask as off-topic, is there an obligation for setting wi-
> fi adapter's IP to 192.168.1.10 or 11? If i turn DHCP on, router
> assigns 192.168.1.11, but i can set also 192.168.1.2 or 3 or 4 or ....
> 11 manually which works without problem. This question was off-topic.
> Don't mess up your mind with my freeze problem please...
>
> With my regards...
>
> Thanks again.- Hide quoted text -
>
> - Show quoted text -


Hi with updated news:
I again experienced freeze with wireless, then i did not click
''repair'' button, upon this freeze, i plugged ethernet cable as you
suggested, with wired ethenet connection the internet works very
good.

Then i entered wireless client list of my router, my wi-fi adapter
does NOT seem in the client list! That proves the connection is lost
although the wi-fi taskbar icon shows connected and duration counter
resuming counting seconds.

Here is your requests:
In this screenshot ipconfig /all describes these values when FREEZE
happens:
http://img204.imageshack.us/img204/1...therneths0.gif


In this screenhot ipconfig /all describes these values when connected
via CAT5 cable which works the internet great.
http://img61.imageshack.us/img61/534...pluggedkt3.gif


Summarized, i tried channels 1,6 or 11 with no luck.

Windows XP SP2 causes this? Connection is lost as wi-fi adapter does
NOT seem in ''wireless client list' when freeze happens. But taskbar
wi-fi icon says still ''connected'' and duration counter resumes ''as
if'' the wireless connection is available...

Thank you.


Reply With Quote