Hi, I own a W810i and also replaced my keypad. The K800i might be a similar
layaut. It's actually very easy, if you know how.
a.) pull off the battery cover
b.) remove the battery
c.) You will see on the very bottom two Torx #6 screws, if you do, don't try
to loosen them with an ordinary very small screwdriver, you'll mess them up.
The two very small Phillips screws you don't have to remove. Buy or
borrow from someone a Torx #6 screwdriver.
d.) After you have removed those 2 Torx screws, use your fingernail or thumb
nail and start b prying the casing on the bottom near the sd-card slot,
work your way slowly around
towards the top. On the very top it's a bit tricky, go slowlythere,
is a plastic square catch. Do NOT use any metal tools to pry the casing
open, you'll mess it up and make it
look ugly. If you have weak fingernails, you can use an old SIM-card
or a credit card. Just be patient, it will open.
Good luck!
(\__/)
(O.o )
(> < )Just be happy and keep on smiling!
Regards
Pete

"IanKR" <ik.rip_@_ntlworld.com> wrote in message
news:q3dki.19137$_l6.400@newsfe6-win.ntli.net...
> How easy is it to change the keypad on the k800i (and how do you do it)?
>
> The keypad on mine has become battered and scratched.
>
> I've seen that they're available
> (http://www.datakits.co.uk/store/genu...ad-p-3570.html,
> for example),
> but do they come with fitting instructions? Does the front fascia of the
> phone unclip, or something?
>
> TIA
>