Brian A wrote:

> On Sun, 08 Jul 2007 20:36:23 +0100, Jono <nothanks@blueyonder.invalid>
> wrote:
>
>>Brian A has brought this to us :
>>> On Sun, 08 Jul 2007 12:17:39 +0100, Jono <nothanks@blueyonder.invalid>
>>> wrote:
>>>
>>>> Brian A presented the following explanation :
>>>>> UDP_RTP 8000 26000 192.168.1.6
>>>>
>>>> That's a massive range Brian......
>>>>
>>> You may well be right.... what do you use?
>>
>>None, nor the DMZ. I use the DDWRT-VoIP firmware for my Linksys WRT54G.
>>Not needed to port forward since.
> I have looked, with interest, at the WRT54G but am I right in thinking
> that there are problems flashing with this software on the later
> versions of the WRT54G?
>

http://en.wikipedia.org/wiki/WRT54G
http://toh.openwrt.org

I recommend the WRT54GS, has more RAM. Can be had on eBay for about 30 quid,
but be sure to ask the seller what the first four digits of the serial are!
It is possible to get openwrt on the 2/8 routers, but it's just not worth
it. Buffalo make openwrt compatible routers that are still available new.

--
<http://ale.cx/> (AIM:troffasky) (UnSoEsNpEaTm@ale.cx)
21:20:38 up 71 days, 23:23, 5 users, load average: 0.24, 0.29, 0.30
09 f9 11 02 9d 74 e3 5b d8 41 56 c5 63 56 88 c0