Jono wrote:

> Michael explained :
> > Jono wrote:
> >
> > > Michael expressed precisely :
> > >
> > > >
> > > > As a PAP2 user - do you have knowledge as to how to achieve
> > > > music on hold - or even how to put a call on hold in the first
> > > > place!?
> > >
> > > You would enter the IP address of a MOH streaming server to play
> > > Music on Hold - I had a cursory google for one....and drew a
> > > blank, though.
> > >
> > > Pressing the R key on a connected handset should put a caller on
> > > hold & give you a second dial tone.
> >
> > I searched music on hold as opposed to MOH and got various results.
> > It's now firmly parked in the too hard to do tray and that's where
> > that will stay!
>
> Oh dear! If I come across one, I'll post it.
>
> > I found an equivalent of the R key - so that was good advice
> > (thanks) ..... all I have to do now is sort out the others such as
> > call back.
>
> What's your definition of "Call Back"?
>
> > ..... don't suppose anybody has a .pdf or .doc copy of the user
> > manual for BT Synergy 3105 phone do they??!
>
> CLearly, I'm not just anybody as I do not have a copy, sorry.

Ooooh! Look what I found!

The User ID or URL of the auto-answering SAS to contact for MOH
services. Examples: 5000,1001@music.Linksys.com, 66.12.123.15:5061.

So - assuming I put this in a box somewhere (MOH Server) does this mean
I get free MOH? ... and do I need to set anything else anywhere such as
SAS to yes?....that, in particular is confusing to a non techie like me
as SAS would assumedly stand for Streaming Music Server ..... but an
instruction manual for a similar Linksys device says that if set you
'yes', then incoming calls will be rejected or some-such (The PAP2 did
not come with any meaningful instructions or details of what settings
mean).

.. Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
.. Caller ID with Name/Number (Multi-national Variants)
.. Caller ID Blocking
.. Call Forwarding: No answer, Busy, All
.. Do Not Disturb
.. Call Transfer
.. Three-way Conference Calling with Local Mixing
.. Message Waiting Indication - Visual and Tone Based
.. Call Return
.. Call Back on Busy
.. Call Blocking with Toll Restriction
.. Delayed Disconnect
.. Distinctive Ringing - Calling and Called Number
.. Off-hook Warning Tone
.. Selective/Anonymous Call Rejection
.. Hot line and Warm Line Calling
.. Speed Dialling of 8 Numbers/Addresses
.. Music on Hold

....is the list of functions - and some are easy to configure such as
call waiting .... but what is a warm hot line calling all about and how
do I assign speed dial numbers to be used (I know I put the numbers in
the box in the config pages but how do I dial them?) These sorts of
questions don't seem to be catered for anywhere .....


Mick
--