On Mon, 05 Sep 2005 22:42:43 -1000, NoNoBadDog! wrote:

> Your cheap $18 PSU has low amperage on the 12 volt rail compared to the
> Antec (and amperage is more critical than rock steady voltage).

Didn't check and don't care. At 24A it's more than adequate.

> Your cheap $18 PSU has no feedback protection, and does not stabilize
> for several *SECONDS* after powering up.

I'm not even concerned if this is true or not.

> You are a cretin for espousing the use of a cheap PSU on any system.
> The fact that you have no issues is indicative that the rest of the
> hardware in your system is as equally crappy as the
> $18 PSU you use. I bet you drive a rusted out POS car, too.
>
So now you want to make it personal with name calling? First, my car has
about 15K miles on it. And second, you are just another moron that spouts
out crap that you don't agree with even if you can't offer any real
first hand proof. I suspect the only thing you use your hand for is done
in bedroom upon yourself. I think you've been just a little benighted.

--
KT133 MB, CPU @2400MHz (24x100): SIS755 MB CPU @2330MHz (10x233)
Need good help? Provide all system info with question.
My server http://wesnewell.no-ip.com/cpu.php
Verizon server http://mysite.verizon.net/res0exft/cpu.htm