Jono wrote:
> Chris wrote on 27/02/2008 :
>> Jono wrote:
>>
>>> Chris Davies wrote
>>
>>>> Also, I don't want the
>>>> SPA3102 to answer an incoming call unless I've picked up the phone
>>>> myself.
>>>
>>> On the PSTN Line page, set PSTN Ring Thru Line 1 to yes and Off Hook
>>> While Calling VoIP no.
>>
>> Can an SPA-3000 also be configured not to answer PSTN until the VOIP
>> call is picked up? That would be really handy. But there seems to be
>> no "Off Hook While Calling VOIP" option in the SPA-3000's menu.
>>
>
> It appears in (presumably) a later firmware revision than yours.
>
> Just upgrade your firmware to the latest & greatest!
>
> the latest on the sipura site is
> <http://www.sipura.com/Documents/spa3k-3.1.10d.zip> (version 3.1.10d)
>
> I'm using the Linksys branded firmware version 3.1.20(GW) which can be
> downloaded from the linksys.com support pages.
>
> This
> <http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayo ut&cid=1169083367861&pagename=Linksys%2FCommon%2FV isitorWrapper&lid=6786143006B03>
> seems to be almost the closest I can get to a link to the firmware. (or
> <http://tinyurl.com/3ynf6n> if the long one wraps)
>
> Even though v 3.1.20(GW) is apparently for a "Linksys" SPA3000, it works
> perfectly well on my "Sipura" SPA3000.
>
> HTH.
>
>
Sipura was acquired by Linksys, acquired by Cisco.

Sinna