"Brian A" <no_spam_bca1000@hotmail.com> wrote in message
news:p85gs39deg6pgu9vjqb82782ali8tamv3q@4ax.com...
>I am using JustVoip ( a betamax company) for the first time. I have
> set up and verified the number I wish to use as my CLI. The CLI
> forwards, to my mobile, when dialled from the softphone. However, it
> neither works from voxalot nor an SPA-3000 ATA. There is a 'client'
> area on the web site that shows my numbers but no reference to CLI.
>
> Further, I have twice validated my mobile number, it accepted the
> number and then 'forgot' it. It did the same, once, with my landline
> number but it seems to have accepted this now - but no CLI forwarding,
> as stated above, except on the softphone.
>
> Anyone any ideas re this?

I had a similar problem with voipcheap.com, another Betamax provider - this
tip may work for you:-
( originally posted by Philippe Deleye I think)

Register your landlines as described above, but make sure you use the
format 0044 xxxx, not in the format +44 xxx

The latter will work for verification, but not for CLI..

Set your SIP device or IP phone to use your phone number, and also use the
same format (0044 xxxx) here.

Cheers from Mike

Cheers from Mike