irstOn Fri, 29 Feb 2008 19:12:41 -0000, "Zid Swanish" <zid@sayme.com>
wrote:

>Anyone know the Sip settings for justvoip??
>"Jose" <go.spam@somewhere.else> wrote in message
>news:47c9242c.4053968@news20.forteinc.com...
>> On Fri, 29 Feb 2008 14:30:06 GMT, Brian A
>> <no_spam_bca1000@hotmail.com> wrote:
>>
>>>I am using JustVoip ( a betamax company) for the first time. I have
>>>set up and verified the number I wish to use as my CLI. The CLI
>>>forwards, to my mobile, when dialled from the softphone. However, it
>>>neither works from voxalot nor an SPA-3000 ATA. There is a 'client'
>>>area on the web site that shows my numbers but no reference to CLI.
>>
>> Hi Brian,
>>
>> I'm not sure about the SPA3102, but in the PAP2, in order for outgoing
>> CID to work, you must have the desired and verified number in the
>> "User ID" field, and "Use Auth ID" set to Yes.
>>
>> Further dow (still in the PAP2) "CID serv" set to Yes, and "Block CID
>> serv", set to No.
>>
>> In the Voxalot provider setup, I belive you need to enter your number
>> in the "From user" field.
>>
>> I'm using VoipCheap, through Voxalot, and CID is going out.
>>
>> Good luck,
>> Jose
>>
>
1. Firstly, thank you all for your suggestions. I will try them.

2. For information to those who have not used JustVoip, though I am
sure that other Betamaxes are the same... 10 Euros turns into 10
pounds once you've added the handling fee and 19% VAT!
You do, however, get 120 days of 300mins/7 days.

3. In reply to the 'top post', these are the JustVoip SIP settings.
SIP port : 5060
Registrar : sip.justvoip.com
Proxy server : sip.justvoip.com
Outbound proxy server : leave empty
Account name : your JustVoip username
Password : your JustVoip password
Display name/number : your JustVoip username or voipnumber
Stunserver (option) : stun.justvoip.com
---
Remove 'no_spam_' from email address.
---