In an earlier contribution to this discussion,
Adam Aglionby <ledlight@gmail.com> wrote:

> "Can't connect to login server" problem with PAP2 connected to Dlink
> DL624 router attempting to connect to Voiptalk.
>
> My networking knowledge is very limited.
>
> Have assigned Pap2 a static IP and put that IP in the routers DMZ.
>
> Followed the Voiptalk setup about entering user and pass but get the
> feeling am misssing out entering settngs in main system page.
>
> Gateway,netmask, primary dns dont have entries which kind of suspect
> they should....
>
Indeed - you need all of these! Gateway is your router's LAN IP address.
Netmask should be the same as the router's netmask (and of all the PCs on
your LAN). Primary and secondary DNS addresses can be the IP addresses of
any valid DNS servers, but it's usual to make them the same as those in your
router and/or PCs.

The PAP2's static IP address must be unique, but in the same subnet as the
router and PCs (but not in the range of addresses dished out by the router
when acting as a DHCP server - if you are using that function).

HTH!
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!