| | Re: PAP2 setup really basic questions...
"Adam Aglionby" <email@example.com> wrote in message
> "Can't connect to login server" problem with PAP2 connected to Dlink
> DL624 router attempting to connect to Voiptalk.
> My networking knowledge is very limited.
> Have assigned Pap2 a static IP and put that IP in the routers DMZ.
> Followed the Voiptalk setup about entering user and pass but get the
> feeling am misssing out entering settngs in main system page.
> Gateway,netmask, primary dns dont have entries which kind of suspect
> they should....
> Any advice gratefully received.
Do as Roger suggests, and if it still doesn't work, try the following
Logi into PAP2, go into Admin settings, advanced view
On SIP page, near bottom, set Subst via Addr toYes
in EXT IP put the external (ie Internet) IP from your router.
That will hopefully avoid a NAT Traversal problem had with the PAP2 &
You'll need to change the EXT IP address if your router ever shows the
external IP address has changed, otherwise it might not work ;-)