In an earlier contribution to this discussion,
Chris Lewis <nospam@.com> wrote:

> I recently purchased a linksys pap2 voip adapter from ebay. The
> adapter worked fine for a day but now there seems to be a problem.
> The power light flashes red and the two line lights flash blue.
> I cannot access the adapter through the http panel and there is no
> dial tone through the phone line.
> Any ideas please?


The PAP2 should have come with a user guide on CD. Did it? If not, you may
be able to download one from the Linksys website.

FWIW, my manual says:
"The Power LED remains solid green when the Phone Adapter is powered on and
ready. It
flashes when the Phone Adapter is booting up, undergoing a self-test, or
performing a
firmware upgrade. If the LED lights up red, the Phone Adapter has failed its
self-test or is
malfunctioning. Refer to “Appendix A: Troubleshooting” for more
information."
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!