"Brian A" > On Sun, 25 Sep 2005 15:43:44 +0200, "Cor"
>>
> The settings for voipbuster go in your SPA-3000 as a gateway setting
> under the 'Line 1' tab. They don't go in the router.
>
>
> FIRST:
> If your Sipura box is set to DHCP then call it up on your phone with
> ****
......................
>
> THEN
> Look in your manual for your router or get info on the Net for how to
> find Port forwarding settings on your router.
>
> In the router you need to look for 'Port Forwarding'.
> Forward these ports to the 'Static IP' of your Sipura box.
> 5004
> 5060 to 5062
> 10000
> 3478
> 8000 to 8012
> and you might also forward:-
> 16384 to 16482
>
> That should do it!
>



1- I followed the "FIRST" steps for the SPA-3000 successfully.

2- More info for my router was found on;

http://www.portforward.com/english/r....0/default.htm



I started forward the ports you listed, but could not get further then port
8000.

It seems there are a limited number of ports that can be added.



However, it is still not working and I need more time to figure it out.

I will make a new subject post later in this group.



TNX Brian for your help and information.

Cor





Remove 'REMOVE' from email address.