On Mon, 26 Sep 2005 22:54:37 +0200, DEMAINE Benoit-Pierre
<nntp_pipex@demaine.info> wrote:
>YOUR STUPIDITY HIDES YOU THAT BR0 HAD TO BE SET UP MANUALLY !!!
The setup is stock Sveasoft Alchemy.
~ # cat /etc/motd
------------------------------------------
Welcome to the Sveasoft WRT54G/GS Firmware
Alchemy-V1.0 build
version v3.37.6.8sv
USE OF THIS FIRMWARE IS AT YOUR OWN RISK
http://www.sveasoft.com
>I never had access to any WRT in my life (just touch the plastic box in a shop), BUT
>YOU SHOW ME TOURSELF THAT I AM RIGHT IN MY ASSUPMTIONS !!!
>
>go and try set up a WDS gateway, and you will learn from life that there is no such
>thing like what you think life is.
WDS is fairly simple to setup.
http://www.linksysinfo.org/modules.p...showpage&pid=7
>some clue to help your mind:
>what is br0 ? how to set it up ?
>have you ever seen a hardware NIC that the driver makes available as br0 ?
>if it's really a linux running around, why arnt there eth0 and eth1 in the routing
>tables ???
It's Linux:
~ # uname -a
Linux router 2.4.20 #2 Thu Apr 21 19:40:17 CEST 2005 mips unknown
br0 is the bridge port and can be linked to any of the other bridged
ethernet ports on the switch. I'll guess (not sure) that the routeing
table uses br0 instead of eth0 because br0 is the filtered port name
while eth0 is the unfiltered port name.
Incidentally eth0 and eth1 are there.
~ # ifconfig
br0 Link encap:Ethernet HWaddr 00:0C:41:9C:3D:10
inet addr:192.168.111.33 Bcast:192.168.111.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:87104 errors:0 dropped:0 overruns:0 frame:0
TX packets:111983 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10605896 (10.1 MiB) TX bytes:47923183 (45.7 MiB)
eth0 Link encap:Ethernet HWaddr 00:0C:41:9C:3D:10
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:268597 errors:0 dropped:0 overruns:0 frame:0
TX packets:274490 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:70588908 (67.3 MiB) TX bytes:64626923 (61.6 MiB)
Interrupt:3 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:0C:41:9C:3D:11
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:6331 (6.1 KiB)
Interrupt:4 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:1170 errors:0 dropped:0 overruns:0 frame:0
TX packets:1170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:96923 (94.6 KiB) TX bytes:96923 (94.6 KiB)
vlan0 Link encap:Ethernet HWaddr 00:0C:41:9C:3D:10
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:87085 errors:0 dropped:0 overruns:0 frame:0
TX packets:188737 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11164196 (10.6 MiB) TX bytes:53280155 (50.8 MiB)
vlan1 Link encap:Ethernet HWaddr 00:0C:41:9C:3D:11
inet addr:63.198.98.51 Bcast:63.198.98.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:181414 errors:0 dropped:0 overruns:0 frame:0
TX packets:85673 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:54582227 (52.0 MiB) TX bytes:11338413 (10.8 MiB)
>have you ever seen on the market a hardware NIC that does at the same time wired and
>non-wired ?
>I never did => where are eth0 and wlan0 ???
wlan0 is wl0
~ # cat /proc/net/wl0
wl0: Aug 2 2004 14:32:51 version 3.60.13.0
resets 23681
perm_etheraddr 00:0c:41:9c:3d:12 cur_etheraddr 00:0c:41:9c:3d:12
board 0x1603, board rev 4.5
wsec 1 auth 0 wsec_index 0 wep_algo 1
rate_override 0
antdiv_override 3 txant 3
current_bss.BSSID 00:0c:41:9c:3d:12
current_bss.SSID "LearnByDestroying"
associated 1
>===>>> stop writing clueless, and stop insulting and arguing with David, Duane, or
>who ever they are.
Clueless? Run a Google Groups search for posting with my name. Read
a few. Then come back and call me clueless.
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831.336.2558 voice Skype: JeffLiebermann
#
http://www.LearnByDestroying.com AE6KS
#
http://802.11junk.com
#
jeffl@comix.santa-cruz.ca.us
#
jeffl@cruzio.com