View Single Post
  #5 (permalink)  
Old 06-03-2008, 08:09 PM
Al
Guest
 
Posts: n/a
Default Re: Pirelli DP- L10 Status


"cybuerke" <cybuerke@PLMgmail.com> wrote in message
news:g243k9$no8$1@energise.enta.net...
>
> "Al" <ardl02029@blueyonder.co.uk> wrote in message
> news:Pxd1k.83906$_c7.83846@newsfe16.ams2...
>> No VoIP Unregistered, VoIP Registered or W under the WLAN signal strength
>> meter on right sidebar.
>> SIP Status also shows no valid SIP logon.
>> Several different SIP accounts have been tried with various providers.
>>
>> Any ideas anyone or is it a duffer?
>>
>> Regards
>>
>> Alastair

>
>
>
> Assuming that you have a WLAN option ticked in your Preferred network? You
> say there is a signal meter, but no 'W' ?
>
> You wouldn't have missed out one of the Sip settings perhaps?
>
> I have mine logged in to Voxalot, and just to run through the settings:
>
> Username: xxxxxxx
> Password: password
> Auth name: xxxxxx
> Display Name: Joe Bloggs III
> Domain name: eu.voxalot.com
> Local port: 5062
> Proxy server: eu.voxalot.com
> Proxy port: 5060
> Register server: eu.voxalot.com
> Register port: 5060
> Register period:3600
> Outbound server: eu.voxalot.com
> Outbound port: 5060
> RTP audio port: 9000
> RTP packet period: 20
> Preferred codec: G711u
>
> Apologies if this appears a little like 'Janet and John go Shopping with
> Mummy' but I've found it's nearly always something bum kickingly simple
> that's been overlooked.
>
>
>

No worries about the Janet & John lol.
I have written enough myself for people and the thought is appreciated.

I have run througfh the checklists but I have tried it with 3 alternate
ITSP's and a Welltech 6200GS SIP IPPBX
Alos we have have another one of a neighbours running fine on all settings
and config.
Seems I do have a duffer and have applied for an RMA form from seller.

I have no NAT traversal problems locally as the WAN/LAN is opened up as SIP
aware.

Slightly baffled as to why he VoIP Unregistered doesn't appear and think
that is the giveaway that all is not well.




Reply With Quote