David Taylor <djtaylor@bigfoot.com> wrote:
>> You can just make an antenna out of the end of the LMR195. Remove about 3
>> inches of the plastic outer 'jacket' of the coax. Then pull the copper
>> braid back over the remaining jacket. Get a piece of brass tubing at a

> Yes, that's what I did with the miniPCI card conversion here:-

> http://www.nodomainname.co.uk/dwl650g/dwl650g-3.jpg

Oh, that's what _you_ did. I thought you had surgically removed the rubber
duckie, exposing the existing internals.

Is Don's 32mm, verses your 31mm in this thread, verses your 30.5mm in the
parabolic dipole, important? Why do yours differ by .5mm, or is that so
miniscule as to be meaningless?

--
---
Clarence A Dold - Hidden Valley (Lake County) CA USA 38.8,-122.5