Re: voiptalk as an SPA-3000 gateway setting - tengo problema! On Tue, 25 Oct 2005 19:41:44 GMT, Brian A
<no_spam_bca1000@hotmail.com> wrote:
>SPA-3000:
>I have voipfone as my main provider - Works well.
>I have voipbuster on gw4 - Works well.
>
>I've tried setting up vopitalk on gw2. I thought it would be simple
>but it doesn't work. When I dial option 901, which is supposed to give
>credit balance (of which I have none) it returns:
>"You have entered incorrect log-in details too many times."
>If I check it out by dialling an 0800 number (Nationwide BS) I get a
>message referring to a 'calling card userid or pasword is incorrect.'
>
>I am certain that the usernumber and password has been entered
>correctly.
>
>Settings gw2:
>Gateway:xxxxxxxx@voiptalk.org
>GW2 password: passnumber given
>GW2 Auth ID:xxxxxxxx
>
>where :xxxxxxxx is the usernumber
>
>Any ideas?
>
>
>Remove 'no_spam_' from email address.
To answer my own posting lest it be useful to others:
I couldn't get the gateway setting to work. Instead I set up the dial
plan to access voiptalk, by dialling #2, thus:
|<#02,:>xx.<:@voiptalk.org;usr="xxxxxxxx";pwd="xxx xxx";nat=yes>
where:
xxxxxxxx is my usernumber
xxxxxx is my passnumber
xx. means any number of 2 digits or more after #2 has selected the
operator.
This now gives a postive response on the test number 902.
However, if I try to dial any subscriber numbers, for example access
the gradwell system (*472) or dial an 0800 I get the unobtainable
tone.
I suspect that you can't do anything on voiptalk unless you purchase
credit - I could be wrong though - any comments re this?
Remove 'no_spam_' from email address. |