John Navas wrote:

> What is your IP address when connected to the LAN in your building?
> If something like 192.168.mmm.nnn, then your building is on a NAT/PAT
> router, and you'll probably need to configure your Tp-Link wireless
> router as a wireless access point, as described in the How To wiki
> below.

My Ip address starts with 194.54.xxx.x


> Since the Tp-Link wireless router has security enabled, you'll only be
> able to connect wirelessly with matching security. Check the user guide
> for how to hard reset the Tp-Link wireless router back to factory
> default settings. Or, if it has wired LAN port(s), try using a wired
> connection.


The router has a reset button which should get it back to the factory
settings but pressing it as per manual makes no difference as far as
security enabled.

There are 4 LAN ports at the back of the router.


So what should I do? I am still clueless...


thank you




> --
> Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
> John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
> Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
> Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>