On 3 Aug 2006 08:41:11 -0700, masia75@gmail.com wrote in
<1154619671.801494.61370@i3g2000cwc.googlegroups.c om>:

>John Navas wrote:
>
>> What is your IP address when connected to the LAN in your building?
>> If something like 192.168.mmm.nnn, then your building is on a NAT/PAT
>> router, and you'll probably need to configure your Tp-Link wireless
>> router as a wireless access point, as described in the How To wiki
>> below.
>
>My Ip address starts with 194.54.xxx.x

Public address, so either router mode or access point mode may be OK.

>> Since the Tp-Link wireless router has security enabled, you'll only be
>> able to connect wirelessly with matching security. Check the user guide
>> for how to hard reset the Tp-Link wireless router back to factory
>> default settings. Or, if it has wired LAN port(s), try using a wired
>> connection.
>
>The router has a reset button which should get it back to the factory
>settings but pressing it as per manual makes no difference as far as
>security enabled.
>
>There are 4 LAN ports at the back of the router.
>
>So what should I do? I am still clueless...

Connect to a wired port, and try to access the configuration screen.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>