Would it not be simpler to use an external HDD enclosure?

--
Kenny Cargill
"Chmeee" <NoAddress@All.com> wrote in message
news:opdii2tranq4qjc0i46vq1329mucfaslsd@4ax.com...
>
> Mother board:
> ASUS P4P800-X m/b rev1.00 BIOS v08.00.09 (date: 2004-08-16)
>
> Installed drives:
> 200 Gb Western Digital SATA connected to SATA1
> 320 Gb Western Digital SATA connected to SATA2
> 120 Gb Western Digital IDE to primary IDE (PRI_IDE)
> DVD-RW & CD-R connected to seconadty IDE (SEC_IDE)
>
> Problem:
> I frequently change IDE drives connected to PRI_IDE to
> service customer drives. Each time a change is made to drives
> on the IDE cable, the BIOS reverts to the IDE device for #1 boot
> priority. This occurs on either the PRI_IDE or SEC_IDE cable.
>
> Question:
> Is there a setting in BIOS that I'm missing, or a BIOS revision
> that will set the drive on SATA1 as the permanent boot device?
> The 200 Gb contains the OS. (XP-Pro SP2)
>
> Work around:
> Ever since I purchased this m/b I've lived with resetting the boot
> priority each time. Not a big problem, but it would be nice if
> there is a solution.
>
> Tried:
> Checked ASUS support for similar problem: none mentioned
> Searched this newgroup for similar problem: none found
> Googled for similar problem: none found
>
>
> Thank you for your attention.
>
> Chmeee_AB_CDN