Just to compound this, when I boot up, if I go to device manager, there
is no code 10 error on the wireless card.

Once it had stopped recognising networks (as I say, takes about a min)
then the code 10 error appears on the device.


squelch41@hotmail.com wrote:

> Nothing on the scan.
> Power management for the card is disabled - no joy!
>
>
> John Navas wrote:
>
> > On 17 Nov 2006 14:30:08 -0800, squelch41@hotmail.com wrote in
> > <1163802608.271042.285160@e3g2000cwe.googlegroups. com>:
> >
> > >I have a 3Com 3CRWE154G72 wireless card.
> > >I am using windows 2000 and the latest drivers.
> > >The card was working fine, and had now started to stop connecting to
> > >networks.
> > >If you scan, ti will find networks for about 1 min, then stops finding
> > >any. It is impossible to connect to any.
> > >I get code 10 errors once the device has stopped finding networks on
> > >scanning.
> > >
> > >I have tried driver reinstalls and reinstalling windows. No joy!
> > >
> > >Any ideas!?
> >
> > Make sure all power management is disabled.
> > Scan computer for viruses and spyware.
> >
> > --
> > Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
> > John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
> > Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
> > Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>