On Thu, 23 Nov 2006 07:06:50 -0600, Louis Ohland <ohland@charter.net>
wrote in <M1h9h.83$pH.33@newsfe05.lga>:

>I have two Buffalo Tech WHR-G54S Router/Access Points.
>
> One is set up as a wireless router. DHCP on, wireless enabled, SSID
>changed from default. The WAN port is plugged into my Ambit cable modem,
>my computer is plugged into a LAN port. I have the internet (this is
>coming through it).
>
> The second WHR-G54S is to be an access point upstairs. I have tested
>it hooked up to a LAN port on the first router, and it works.
>
> What do I need to set between the two WHR-G54S so that I can set the
>second up as an access point upstairs?

Either:
* Cable connection between them (Ethernet, power line networking, phone
line networking, TV coax networking)
* Upstairs unit configured as a repeater.(if possible, cuts wireless
speed in half)

>SSIDs should be the same
>Security on both needs to match (in this case AES)
>DHCP on downstairs, DHCP off upstairs.
>
> Anything that is missing?

Connecting the two units.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>