View Single Post
  #3 (permalink)  
Old 01-19-2007, 02:50 AM
Jeff Liebermann
Guest
 
Posts: n/a
Default Re: DD-WRT v23 SP2 site survey shows "Open - No"

Louis Ohland <ohland@charter.net> hath wroth:

> I had to change some network connections on my Buffalo WHR-G54S based
>network. I changed the router names, passwords, User IDs. I can log into
>either WHR-G54S from a system connected to it via the LAN ports. I can
>ping the connected router. But I can't connect via wireless between
>them. When I run site survey from the second WHR-G54S, under "Open" it
>says No.
>
>Router 1 Connects to internet (this is through it}
> AP mode, Mixed, WPA-PSK TKIP, DHCP Server enabled, Loopback Disabled
>
>Router 2
> Client Bridge, Mixed, WPA-PSK TKIP, DHCP server disabled, DHCP
>forwarder, Loopback disabled.


Perhaps it would be helpful if I explain what the "site survey" button
does.

If your device is in "AP mode", then firing off the site survey tool
temporarily forces the device into the "client bridge" mode so it can
see other AP's. If you then hit "Join" you are now set to the "client
bridge" mode, and NOT the "AP mode". This is probably what happened
to you (as it did to me twice before I figured out what the [deleted
expletive] was happening. The problem is that a client will not see
another client with the "site survey" button, which is why your Router
1 disappeared.

Therefore, I suggest you either go back and check your "Wireless Basic
Settings" Mode setting, or play it safe and just stomp on the reset
button for over 15 seconds and start over. Router 2, setup as a
client, is probably setup just fine.

> I saw Router 1 would disappear from the sites under system
>information. This does not appear to be a power issue, since the signal
>at #2 is about 63%.
>
> I did check WIKI, searched the DD-WRT forums, tried Google Groups.
>Most mentions [perhaps all] of using the site survey just tell you to
>hit Join, but don't talk about what to do if a site shows up as not
>open. Hitting Join results in a message that you have been added as a
>client, but no DHCP lease shows up, the router #1 fades in and out
>[disappears then reappears].
>
>Can someone point me to a more detailed description of DD-WRT's "Site
>Survey"? The help page has about one sentence on it...



--
Jeff Liebermann jeffl@comix.santa-cruz.ca.us
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Reply With Quote
Sponsored Links