Ian Pawson wrote:

> Sorry to say that the spa3000 only has a single setting for hook flash
> delay.

On which firmware version?

Look at
http://www.provu.co.uk/sipura_demo/s...admin/advanced

and click the on the regional tab.

Then scroll down to where it says `Control Timer Values (sec)` and there
are 2 settings. One of the left, one on the right.

What surprises me though, is that I would expect there to be three settings.


Hook Flash Timer Min:
and
Hook Flash Timer Max:

which affect detecting a hook flash on the FXS port

And also a third setting for the length of hook flash to be signalled on
the FXO port, when a flash hook signal is received over IP.


The above link is a bad example, because it shows a copy of a version 2
firmware. Version 3.xx is much better.

Tim