Tim Bray wrote:
> Ian Pawson wrote:
>
>> Sorry to say that the spa3000 only has a single setting for hook flash
>> delay.
>
> On which firmware version?
>
> Look at
> http://www.provu.co.uk/sipura_demo/s...admin/advanced
>
> and click the on the regional tab.
>
> Then scroll down to where it says `Control Timer Values (sec)` and there
> are 2 settings. One of the left, one on the right.
>
> What surprises me though, is that I would expect there to be three
> settings.
>
>
> Hook Flash Timer Min:
> and
> Hook Flash Timer Max:
>
> which affect detecting a hook flash on the FXS port
>
> And also a third setting for the length of hook flash to be signalled on
> the FXO port, when a flash hook signal is received over IP.
>
>
> The above link is a bad example, because it shows a copy of a version 2
> firmware. Version 3.xx is much better.
>
> Tim
Thanks for that, but I was looking on the pstn page in the 'fxo timer
values' section where the 'pstn hook flash len' is set to .25.
The firmware value is 3.1.10(GWd)