On Tue, 23 Jan 2007 02:53:24 GMT, "Diane LeMasson"
<dlemasson@prodigy.net> wrote:

>I an asking for help for my son who has been having problems
>with this USB adapter to get it to work on an older computer.
>The OS is windows 98se.
>
>This DWL G122 USB adapter is (or was) networking with a D-Link Di- 624
>router
>that is connected to a dsl modem, to a OS XP computer.
>
>This adapter worked fairly well for about 3-5 days.
>However during this time the adapter did fail but with several reboots,
>reinstallments
>manage to get it to work again before it stopped working all together.
>Lights do show then stop.

Vintage software and hardware. Groan. I'll assume you have the
latest drivers from the Dlink web pile.

If the access point is using WEP encryption, use the Hex key, not the
ASCII key. If that doesn't work, try TEMPORARILY disabling encryption
in the DI-614 router.

Fire up the Dlink managment utility (the "D" in the system tray). Run
the "site survey" and see if you can "see" the DI-624 router, or the
neighbors wireless systems. This will at least check if the DWL-G122
is working.

If there are any profiles that were created, delete them and start
over by creating a new profile (save settings).


--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558 jeffl@comix.santa-cruz.ca.us
# http://802.11junk.com jeffl@cruzio.com
# http://www.LearnByDestroying.com AE6KS