Ikke wrote:
> Jeff Liebermann <jeffl@comix.santa-cruz.ca.us> wrote in
> news:f9a4s2581p2a8f0pcitr6ca1dnk0dloblg@4ax.com:
>
> <snip>
>
>>Well, since it doesn't route and wireless connections are currently
>>impossible, it's possible that the firmware settings have become
>>trashed. I'm not familiar with SMC routers, but on Linksys, I just
>>punch the reset button and start over with all the settings. Lacking
>>any better suggestions, it seems like the next step.
>
>
> Alas, as I stated in the original message, I've already tried resetting the
> machine. I've even tried resetting it different ways (resetting according
> to the manual, reset procedure as found on other US Robotics) just to be
> sure. Nothing helped.
>
> So what's the next step? The machine is no longer under warranty, so
> getting it replaced is not possible. Apart from buying another one, I'm at
> a loss here...
>
> Thanks,
>
> Ikke

If you flash the router with the firmware, which might fix the problem,
and the router continues to act up, then the router is through. They
don't last forever.