"Psst" <braantispam@hotmail.com> wrote in message
news:7cf8v21cuaiuql0p9tbbj8iqkm7ah1vp77@4ax.com...
> Hello,
> i have bought a used Cisco 7940G which appears to have been used with
> an office network. It didnt have a psu with it so it must have been
> line powered. I have bought a psu and am trying to configure it to use
> with voip via my router/cable connection.
>
> My first problem is that when i go to network config in the settings
> menu and press select, i am shown the menu items but with a closed
> padlock. I tried the **# buttons to try and unlock but no change
> unless im doing something wrong.
>
> The current firmware versions are as follows;
>
> Appload ID P00307020300
> bootload id PC0303010100
> version 7.2(3.0)
>
> My research tells me that i need to upload the latest sip image from
> the cisco website. I have downloaded that file to my pc and then
> installed the free solarwinds tftp server software. I have unzipped
> all the cisco files in the package and put them in the tftp server
> root directory. I then powered off and on the phone but there seems to
> be no comms between the tftp server running on my pc and the phone.
>
> Perhaps someone could point me in the right direction?

admin manual entry about erasing config (from an old version of the Call
Manager manuals, so may not apply)
http://www.cisco.com/en/US/products/...html#wp1020895

if that doesnt work - time to hunt the Cisco site a bit more.
>
> thanks
>
> joe
--
Regards

stephen_hope@xyzworld.com - replace xyz with ntl