On Sun, 11 Mar 2007 17:39:52 +0000, Psst <braantispam@hotmail.com>
wrote:

Can you keep us informed of progress, I intend to do this myself soon

Chris

>Hello,
> i have bought a used Cisco 7940G which appears to have been used with
>an office network. It didnt have a psu with it so it must have been
>line powered. I have bought a psu and am trying to configure it to use
>with voip via my router/cable connection.
>
>My first problem is that when i go to network config in the settings
>menu and press select, i am shown the menu items but with a closed
>padlock. I tried the **# buttons to try and unlock but no change
>unless im doing something wrong.
>
>The current firmware versions are as follows;
>
>Appload ID P00307020300
>bootload id PC0303010100
>version 7.2(3.0)
>
>My research tells me that i need to upload the latest sip image from
>the cisco website. I have downloaded that file to my pc and then
>installed the free solarwinds tftp server software. I have unzipped
>all the cisco files in the package and put them in the tftp server
>root directory. I then powered off and on the phone but there seems to
>be no comms between the tftp server running on my pc and the phone.
>
>Perhaps someone could point me in the right direction?
>
>thanks
>
>joe