On 15 Oct 2005 16:46:56 -0700,
briansmccabe@gmail.com wrote:
>It does have a USB port -- but with no OS installed, what expectation
>would I have of the machine even recognizing the USB-attached CD drive?
The expectation would be that you look in the bios for
applicable settings, and you try one to see if it works.
The main question is, what abilities and hardware do you
have at your disposal to aid you towards your goal?
If all else fails, pull out the hard drive and use a
laptop-desktop IDE adapter to hook the drive up to a desktop
system. Create a 2nd partition (it's size depending on your
need for a 2nd partition later, if you would find that of
benefit in your regular uses of system then make it bigger
rather than smaller).
Format both as FAT32, make primary partition active and
bootable w/system (dos) files & Smartdrive on it. Put (I
assume windows?) OS installation files on the 2nd partition,
by copying whole /386 folder form windows CD to the 2nd HD
parititon. Also put the driver files on this 2nd
parititon, and if you need some kind of ZIP program to
decompress them (depending on the operating system's
integral abilities), also put that on 2nd partition. At the
very least, make sure you have a connectivity driver, like
modem or network adapter, so if some other driver doesn't
work you can network the system to get the rest of the
drivers instead of having to pull the HDD and recopy them
(though if you had a USB drive of some sort, that's another
alternative once a supportive OS is installed).
Boot the laptop to DOS with drive installed, load
smartdrive, install windows from 2nd partition (run
/386/winnt.exe).