On 16 Aug 2007 20:03:04 -0500, nonya <cwpop@netzero.com> wrote:
>I have setup my PC at work with a Linksy router configured as a client bridge
>and an outside antenna.
Any particular model number Linksys router? Stock firmware or one of
the Linux based alternatives?
>I'm using it to tap into the cities public wifi system.
Tap? Do you have permission or is this some form of wireless wiretap?
>My employer has thier network Gestopo troops periodically check for unauthorized
>wireless networks. I'm wondering if they can sniff my setup. Any opinions or
>suggestions are appreciated.
Well, you didn't describe how your work desktop is connected to the
wireless client bridge and/or the office network. If you unplug from
the office LAN, and plug the PC's ethernet port into the wireless
client bridge, then there's nothing your employer can do on their
wired LAN to find your wireless client bridge. You're literally
isolated.
If your employer has a wireless system, they could find your wireless
client bridge. Some wireless access points have a sniffer feature,
that searches for other wireless traffic. A few will do direction
finding by time difference of arrival.
<http://www.ekahau.com>
However, if you're simultaneously connected to the office LAN and the
wireless client bridge, through a switch, hub, or dual ethernet port,
you're going to get caught by ARPwatch. It looks for new devices on
the network. If your wireless bridge MAC address appears on the
office network, it will show up as a foreign device. There are
similar tools for wireless, but most admins only monitor their own
network and probably do not monitor or log the municipal WLAN traffic.
Please do your best to avoid detection and keep your job. I wouldn't
want you working for me.
--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
jeffl@comix.santa-cruz.ca.us
#
http://802.11junk.com jeffl@cruzio.com
#
http://www.LearnByDestroying.com AE6KS
Can an AP client be detected 
Linear Mode
