Hi
Pin pointing the trouble in Wireless networks involves a process of going
methodically through the configuration to the point that is causing the
problem.
The following involves some reading but it includes most of the information
needed for solving Wireless issues.
My New Wireless does not work -
http://www.ezlan.net/wireless.html
Wireless, Basic Configuration -
http://www.ezlan.net/Wireless_Config.html
Wireless Security -
http://www.ezlan.net/Wireless_Security.html
Jack (MVP-Networking).
<tron9901@msn.com> wrote in message
news:1182476292.387527.82850@g37g2000prf.googlegro ups.com...
> Hello all.
>
> While troubleshooting a friend's network, I can't get a wireless NIC
> to work. Here are the stats on the network:
>
> ISP:
> AT&T DSL
>
> Router:
> Linksys Wireless G 2.4 GHz router model WRT54G
>
> Computer A (one network card):
> - Intel (R) PRO/100 VE Network Connection
>
> Computer B (two network cards):
> - Intel (R) PRO/100 VE Network Connection
> - Linksys Wireless-G PCI Adapter
>
> Computer B, a Dell desktop running Windows XP, is where the problem
> lies. The wireless NIC shows up (in Control Panel...Network
> Connections) as working just fine, excellent reception; but I can't
> ping the (default gateway IP address) router successfully. And of
> course no internet access.
>
> The (wired) Intel NIC is disabled. I've tried enabling it and it makes
> things worse.
> The XP firewall is turned off, and there's no encryption enabled on
> the wireless NIC.
> I've tried both manual IP settings, and DHCP.
> I've tried repair, and disable then enable of the wireless NIC.
> I've powered the router down for a few minutes, then powered it back
> on.
> No luck.
>
> Any suggestions would be greatly appreciated. Thanks!
>
> - Dave
>