DD-WRT restore original firmware

Hello,
I used the dd-wrt.v23_sp2_standard to update my Linksys WRT54GL
firmware but after that I cannot access the web interface of the
router. I can only access the router from telnet in 192.168.1.1. Do
you know how can I repair the router or even restore the original
firmware by using telnet and the shell?
Thank you very much!

Al <albertzurita@gmail.com> hath wroth:

>I used the dd-wrt.v23_sp2_standard to update my Linksys WRT54GL
>firmware but after that I cannot access the web interface of the
>router. I can only access the router from telnet in 192.168.1.1. Do
>you know how can I repair the router or even restore the original
>firmware by using telnet and the shell?

If you can telnet to the router, you should be able to get to the web
interface. First try the reset button. Hold it down for a LONG time.
Something like 30-60 seconds to be sure. Let go. *WAIT*. Then try
connecting with a web browser.

It's also possible that your web browser is doing weird things. Mine
does when it caches old pages and they happen to be a blank page.

Since telnet works, there's nothing wrong with testing the web server
with telnet. Try it:

telnet 192.168.1.1 80
get junk (type this blindly as there's no echo in Windoze telnet)

You should get something like:
HTTP/1.0 400 Bad Request
Server: httpd
Date: Thu, 21 Jun 2007 09:24:20 GMT
Content-Type: text/html
Connection: close
(mess of HTML code)
Connection to host lost.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

On Jun 21, 11:27 am, Jeff Liebermann <j...@cruzio.com> wrote:

> It's also possible that your web browser is doing weird things. Mine
> does when it caches old pages and they happen to be a blank page.
>

I get that a lot too. Usually closing all browser windows and/or
deleting all offline and online files will do the trick.

Steve