Ok I have a huge problem and I hope this doesn't mean my router got
Following the instructions at http://thescorpion420.dyndns.org/por...nt/view/27/36/
I skipped the first two steps referring to using
vxworks_killer_g_v06.zip and the VXWorks Killer image tool to create an
image of my WRT54G MAC adress. I screwed up the first step and was
unable to get "Management Mode Firmware Upgrade Screen".
So I just used tftp.exe to Upload an image of
dd-wrt.v23_micro_generic.bin. Now I log into http://192.168.1.1
the DD-WRT Control Panel but it won't read my LAN/WAN IP. If I go to
status it just says:
Login TypeAutomatic Configuration - DHCP
DNS 1 DNS 2 DNS 3
Remaining Lease Time0 days 00:00:00
Also since I didn't do the MAC ADDRESS imaging thing, the MAC Address
of my router is the DD-WRT default: 00:40:10:10:00:02 . Is there anyway
to fully start over and go back to the original Linksys control panel
or atleast to fix the DD-WRT configurations?
I would appreciate any help at all. Thank you in advance!