Got my cheap chinese Ebay yagi - here's some test results

Further to my previous post regarding laptop problems, during which
time I mentioned I had a cheap Ebay yagi in the mail, it has arrived.

It's actually quite good, reasonably well made, and no complaints about
quality v's price.

I already had a bit of web info up on corner reflectors, so I added the
test results to that page.

http://users.picknowl.com.au/~gloaming_agnet/ant1.html

If anyone's interested have a look and see what you get for $25 AUS.

Incidentally the large gap near the driven element as mention by Jeff
L(displayed on the Ebay ad) is not a feature of the unit I received.

It appears to be a suitable toy for tinkering with, and money
comparatively well spent :-)

Cheers

Rob

On 8 Oct 2009 14:36:37 +1100, "me here" <gloaming_agnet@hotmail.com>
wrote:

>It's actually quite good, reasonably well made, and no complaints about
>quality v's price.

Looks nice. Congrats.

>http://users.picknowl.com.au/~gloaming_agnet/ant1.html
>Incidentally the large gap near the driven element as mention by Jeff
>L(displayed on the Ebay ad) is not a feature of the unit I received.

No kidding. Compare the photo at:
<http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170388251288>
with what you received.


--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com jeffl@cruzio.com
# http://www.LearnByDestroying.com AE6KS

Jeff Liebermann wrote:

> On 8 Oct 2009 14:36:37 +1100, "me here" <gloaming_agnet@hotmail.com>
> wrote:
>
> > It's actually quite good, reasonably well made, and no complaints
> > about quality v's price.
>
> Looks nice. Congrats.
>
> > http://users.picknowl.com.au/~gloaming_agnet/ant1.html
> > Incidentally the large gap near the driven element as mention by
> > Jeff L(displayed on the Ebay ad) is not a feature of the unit I
> > received.
>
> No kidding. Compare the photo at:
> <http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170388251288>
> with what you received.

I was a bit concerned after you pointed that out, but the unit was
already on it's way.

But the one out of the box is OK.

It's the same seller, but if you check the photo on my web page you can
see the driven element is in the correct position.

So the picture in the Ebay ad is strange. It shows the driven element
pop rivetted quite close to the first reflector, whereas on the one I
reievd it's mid point.

I was tempted to email the guy about it.

Rob

me here wrote:

> Jeff Liebermann wrote:
>
> > On 8 Oct 2009 14:36:37 +1100, "me here" <gloaming_agnet@hotmail.com>
> > wrote:
> >
> > > It's actually quite good, reasonably well made, and no complaints
> > > about quality v's price.
> >
> > Looks nice. Congrats.
> >
> > > http://users.picknowl.com.au/~gloaming_agnet/ant1.html
> > > Incidentally the large gap near the driven element as mention by
> > > Jeff L(displayed on the Ebay ad) is not a feature of the unit I
> > > received.
> >
> > No kidding. Compare the photo at:
> > <http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170388251288>
> > with what you received.
>
> I was a bit concerned after you pointed that out, but the unit was
> already on it's way.
>
> But the one out of the box is OK.
>
> It's the same seller, but if you check the photo on my web page you
> can see the driven element is in the correct position.
>
> So the picture in the Ebay ad is strange. It shows the driven element
> pop rivetted quite close to the first reflector, whereas on the one I
> reievd it's mid point.
>
> I was tempted to email the guy about it.
>
> Rob

Hi Jeff

Just further to this, I see that ebay item 130335406078 from a totally
different seller shows the same odd setup for a very similar antenna.

Maybe mines a reject :-)

Rob