Jonathan L. Parker wrote:
> Gethryn wrote:
>
>> I have an ADSL modem-wireless-router and wish to print, from my
>> wireless enabled lap-top to a remote printer...
>> is it possible to link to the remote printer, a conventional ink-jet
>> with USB, fitted with a cheap USB wireless stick?
>
> In a word, no. You forget that in order to reach it over the network,
> you'll have to supply the printer with an IP address. Unless it has
> built-in wireless networking support, the only way to do this is to
> connect it to a server on the network-either a computer on which it's
> set up to be shared or the overkill solution you express your disdain
> for below.
>
>> I realise there are wirless enabled print servers but this seems to
>> be rather an expensive overkill...
>
> ...and now you know why it's so expensive.
Actually, yes (but only in some circumstances, and the two ways i have used
are expensive)...
one way was to use an older broken keyboard computer (bought it for $25 at a
flea market, had an external USB keyboard in my junk pile, just plugged it
in, used it instead of the laptops broken keyboard, and it worked fine, have
it on the wireless network and had a shared USB printer on it, bonus I also
had a 500GB External USB disk hooked to it, so I could share that on the
network too),
second way (I went to when I added a TB of network storage, is with a
buffalo tech linkserver live
(
http://www.buffalotech.com/products/...kstation-live/)
provides various sizes of network storage, and has two USB ports that can
support specific printers (think it will work with most, but not
Multifunction Devices - it says Built-in Print Server to Print Files from
Anywhere on your Network. Multi-function printers not supported. Works in
Windows only.)