use Linksys WRT54G as access point off of Firebox Edge?

I've got my firebox as 192.168.111.1 and I gave the Linksys 192.168.111.5. I
still can't access the Linksys.

When I hook directly up to it I can access it.

Do I need to put it in bridge mode or something?

Can I use it as an access point?

Thanks.

Bryce.

"Bryce" <fukuzz@hotmail.com> wrote in
news:1nvCe.8$5v1.9790@news.uswest.net:

> I've got my firebox as 192.168.111.1 and I gave the Linksys
> 192.168.111.5. I still can't access the Linksys.
>
> When I hook directly up to it I can access it.
>
> Do I need to put it in bridge mode or something?
>
> Can I use it as an access point?
>
> Thanks.
>
> Bryce.
>
>
>


All I did was disable DHCP on the BEFW11S4 v1 router, set the device IP to
192.168.111.2, took the router out of *gateway* and put it into *router*
mode, configured the router to use static the IP set-up pointing to the WG
at 192.168.111.1 -- not using DHCP setup that would be to obtain IP from
the WG for the router, and connected it to a LAN port on my WG Firebox III
SOHO 6. I could access the Linksys router at 192.168.111.2 with the
browser.

The Linksys just became a wire/wireless AP *switch*.

Duane :)

I'll give it another shot then. Since somebody has done it, obviously I've
just set something up wrong.

Thanks.

Bryce.


"Duane Arnold" <notme@notme.com> wrote in message
news:Xns96967F9317869notmenotmecom@216.148.227.77. ..
> "Bryce" <fukuzz@hotmail.com> wrote in
> news:1nvCe.8$5v1.9790@news.uswest.net:
>
>> I've got my firebox as 192.168.111.1 and I gave the Linksys
>> 192.168.111.5. I still can't access the Linksys.
>>
>> When I hook directly up to it I can access it.
>>
>> Do I need to put it in bridge mode or something?
>>
>> Can I use it as an access point?
>>
>> Thanks.
>>
>> Bryce.
>>
>>
>>
>
>
> All I did was disable DHCP on the BEFW11S4 v1 router, set the device IP to
> 192.168.111.2, took the router out of *gateway* and put it into *router*
> mode, configured the router to use static the IP set-up pointing to the WG
> at 192.168.111.1 -- not using DHCP setup that would be to obtain IP from
> the WG for the router, and connected it to a LAN port on my WG Firebox III
> SOHO 6. I could access the Linksys router at 192.168.111.2 with the
> browser.
>
> The Linksys just became a wire/wireless AP *switch*.
>
> Duane :)

"Bryce" <fukuzz@hotmail.com> wrote in
news:eUwCe.393$Bl2.3816@news.uswest.net:

> I'll give it another shot then. Since somebody has done it, obviously
> I've just set something up wrong.
>
> Thanks.

http://linksys.custhelp.com/cgi-bin/...r/std_adp.php?
p_faqid=358&p_created=1084209764
&p_sid=FJfGf8Dh&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2 J5PSZwX2dyaWRzb3J0PSZwX3J
vd19jbnQ9MjM1JnBfcHJvZHM9MSwwJnBfY2F0cz0mcF9wdj0xL jE7Mi51MCZwX2N2PSZwX3NlYX
JjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfc2NmX2xhbmc9 MSZwX3BhZ2U9MSZwX3NlYXJja
F90ZXh0PXdpcmVsZXNzIHRvIHdpcmVk&p_li=&p_topview=1


The above is in the link below.

You can use it as a guide.

http://tinyurl.com/9nvq7

Duane :)