engenius enh202 800mW 11n outdoor ap / bridge

The new enh202 is finally here with 800mW of power and 300Mbps 2x2 mimo this is probily one of the best 2,4Ghz bridges on the planet even better than ubiquity nanostation m2

more information here:

Keenan Systems Wireless Store - EnGenius ENH202 8,000mW EIRP 300Mbps 802.11n bridge

are there anyone who can help me how to authenticate enh202 AP mode with my client/desktop. I was ask by a Windows security user name and password.
If you can help me out how to configure enh202 AP mode which directly or wireless connected to my internet router to provide wireless connections to wireless clients. Thanks so much!

Just put the enh202 into AP mode and connect to a lan port on your router.

more info on the enh202 here:



Keenan Systems Wireless Store - EnGenius ENH202 8,000mW EIRP 300Mbps 802.11n bridge

I bought 4 of these suckers to expand my network to a home 3.1 KM away. Direct line of site I left on full power and getting a consistant -76 dBm siginal at this range. Noise is -95 dbm so just under 20 SNR. Getting 50 Mbps at this range like I said radio's on max. Works great, 2-3ms ping.

2nd pair shoots 1000 feet through a single apple tree left them idled back to 20 dBm gain each getting nice -60 dBm siginal here.

As for using as a access point for your machines I just went with a basic indoor rubber duck special Dlink and used the Engenious radios for bridging only. I can confirm what keenanj said just set yours to Access Point mode and get it on the network with a static IP if you can (easy to administer). Make sure something on your Lan is doing DHCP like your gateway. the 202 just works like a basic access point with killer siginal. Just keep your associated clients within their range because the 202 is way stronger than a typical wireless adapter in a laptop so only as good as your weakest link.

is this could help?