Need loan of LMR400 crimp tool, and some plugs.

During the week between xmas and new years I want to get some wireless happening (finally) - I have sorted the enclosures etc out, but need to get plugs on the cables.

Does anyone have an LMR400 crimper I can borrow for a few days time?

I will have mine available in a week or so's time if that is any use.
Only got the LMR195 here at the moment.

Ok, its just at the moment, the omni is up the pole, and at the bottom the cable is just cut, as I took the RP-SMA off since i need a RP-TNC for the new AP, but have not gotten the plugs for it yet.

So you will have the 0.429" crimper in a week or so or am I mis-reading you?

Yes it is the .1", .128", .429". and cable stripper.

Should only be a week away.

I have it here now if you still need it.

Heh, I borrowed a crimper off someone elase, but the problem I have is that the N plug and adaptor wont fit in the case, so Im waiting on some lmr400 RP-TNCs to come from a guy on ebay, then I should be good to go. I also messed up crimping the N that I had because I lost too much shield when stripping it, so I think a cablestripper is in order.

I have to give this back soon, so if I can borrow yours+stripper in about a week it should be all good to go then

once I have the omni working again it will give people something to aim at.

No problem,

I also have
N/Male for lmr400&195
N/female for lmr195
RP-TNC M&F for lmr195
if you need.