Senao 8610 EXT Password reset

I have locked myself out of my Senao 8610 EXT. Anyone know the console port settings so i can attempt to reset the flash memory via terminal. Or any technique to reset to factory defaults

Cheers

Hi there, this is the process for the EOC-3220, try using the same settings for HyperTerminal. I am a Senao agent so I will contact tech support and get the procedure for the 8610

An RS-232 null modem serial cable is required for this procedure.

1. Connect the EOC-3220 to your computer with a null modem serial cable.

2. Start a HyperTerminal session: Click Start and then select Programs -> Accessories -> Communications -> HyperTerminal.

3. After the HyperTerminal window appears:
a. Give this new connection a name. Ex: EOC-3220.
b. Select correct COM port. Ex:COM1.
c. Set baud rate as "38400", data bits "8", parity "none", stop bits "1", and flow control as "None". Then press “OK” to bring up the HyperTerminal window.

4. Wait until the "#" is displayed in the HyperTerminal window.

5. Type "flash reset", then hit enter.

6. Type "reboot", then hit enter. After the device reboots, all settings will be at factory default.


Cheers

Dale
Go Wireless NZ