Senao 3054 cb3 WDS problems

Hi; Looking For Somebody That Can Help Me Out With The Problem I Am Having Here.

I Use Senao 3054 Cb3 And I Have A Vector Antenna With A 1 Watt Booster And From That Vector Antenna 17 Dbi I Am Feeding 6 More Senao 3054 Cb3 Using Wds; Every One Of These 6 Radios Feeding From The Vector Has A 1 Watt Booster And A 15 Dbi Omni Antenna; The Annoying Problem Im Having Is That This Radios Get Jammed Every Day; Every Single Day I Have To Go To The Radio And Reset By The Bottom In The Back And Then The Radio Start Working Fine Again But After A While Gotta Go Back And Reset It Again; Im Thinking I Have A Big Collision Problem But Maybe Not; Please Can Somebody Help Out With This.

Have you tried getting rid of the amps? In the vast majority of cases they are simply not needed and just cause problems with noise and latency.

In most countries that kind of radiated power is simply illegal in the 2.4GHz band anyway, have you checked up on this with your local authorities?

__________________
Jeremy

Marlborough WiFi Project

Hi there, I agree with nzlamb 1 watt into a 17dBi antenna is not legal in most countries and would probably not help your signal quality either. If there are buildings around you, will be suffering from major reflections and multipathing of your signal. What is the distance between your access points? and do they have line of sight?
If they are less than 3km I would try and remove the amps

Good luck
Dale