Correct settings for Handytone 486 and Voipbuster

#1 (**permalink**) 07-28-2005, 01:51 PM

Can anyone provide me with correct settings for HT486 and Voipbuster to
be able to call outbound (it's enough):
SIP server:
Outbound proxy:
Preffered vocoder:
local SIP port:
local RTP port:
Use random port: Y/N
NAT travelsal:Y/N
STUN server:
Use NAT IP:
Proxy-require:

thanks in advance,

#2 (**permalink**) 07-28-2005, 04:31 PM

"adam" <adam_radziszewski@hotmail.com> wrote in message
news:1122558670.415438.283090@g49g2000cwa.googlegr oups.com...
> Can anyone provide me with correct settings for HT486 and Voipbuster to
> be able to call outbound (it's enough):
> SIP server:sip.voipbuster.com
> Outbound proxy:
> Preffered vocoder:PCMU
> local SIP port:5060
> local RTP port:5004
> Use random port: N
> NAT travelsal:Y (if you are behind a router)
> STUN server: stun.voipbuster.com
> Use NAT IP:
> Proxy-require:

Not sure if SIP is woring, as they are mainly IAX based, but try this

Make sure you use the fill international number when dialling

Sparks...

#3 (**permalink**) 07-28-2005, 05:05 PM

> Not sure if SIP is woring, as they are mainly IAX based, but try this
>

I have just tested it on my BugeTone 100, and it seems to work (I only got
one way audio when I tried, but it is behind a firewall with the ports
forwarded to my asterisk box, so that isn't a suprise really!

Sparks...

#4 (**permalink**) 07-28-2005, 07:48 PM

Sorry, but it doesn't work. I tried. I also have one way audio. I don't
get even dialed tone.
Any other clues, Sparks?
Maybe something to do on firewall?
On status tab with these settings I have:
NAT: detected NAT type is symmetric NAT
Total SIP Message Sent: 16
Total SIP Message Received: 32
Total RTP Packet Sent: 1716
Total RTP Packet Received: 0
Total RTP Packet Loss: 1

Adam

#5 (**permalink**) 07-28-2005, 09:02 PM

"adam" <adam_radziszewski@hotmail.com> wrote in message
news:1122580124.774834.34060@g14g2000cwa.googlegro ups.com...
> Sorry, but it doesn't work. I tried. I also have one way audio. I don't
> get even dialed tone.
> Any other clues, Sparks?
> Maybe something to do on firewall?

How is your network setup?
I assume you have a router somwhere?

You need to set port 5060 UDP to forward to your HT486 on the router, this
should get two way audio going.

Sparks...