I have now got my system set up so I can dial out with VopDiscount and have
got a local number that people can ring me on (Thank you {{{{{Welcome}}}}} )
I have an unlocked Linksys PAP2T with the latest firmware.
How do I get something to display on caller IDs when I ring via
VoipDiscount. If I do ring "UNAVAILABLE" is displayed.
On Fri, 02 Feb 2007 13:36:10 GMT, Scope <scope@somewhere.com> wrote:
>Port Admiral Haynes wrote:
>> How do I get something to display on caller IDs when I ring via
>> VoipDiscount. If I do ring "UNAVAILABLE" is displayed.
>
>I dont think you are able to, sorry.
At least it is 'Unavailable' - much better then 'Withheld' as that can
result in blocking to some numbers.
Remove 'no_spam_' from email address.
"Scope" <scope@somewhere.com> wrote in message
news:e7Hwh.7123$fy5.2776@newsfe6-win.ntli.net...
> Port Admiral Haynes wrote:
>> How do I get something to display on caller IDs when I ring via
>> VoipDiscount. If I do ring "UNAVAILABLE" is displayed.
>
> I dont think you are able to, sorry.
You can with voipcheap so it should be possible for voipdiscount. I know
you have to do it all through the softphone (latest version) for it to work.
If I remember correctly you need to set your mobile number in the personal
settings box (taking care to enter in 00447 format), then verify the number
and set as CLI. Could be that I have remembered it wrong. Doesn't work for
landline numbers.
Try searching the group as I think I contributed to an earlier thread on the
subject.
Herman wrote:
> You can with voipcheap so it should be possible for voipdiscount. I know
> you have to do it all through the softphone (latest version) for it to work.
> If I remember correctly you need to set your mobile number in the personal
> settings box (taking care to enter in 00447 format), then verify the number
> and set as CLI. Could be that I have remembered it wrong. Doesn't work for
> landline numbers.
Sorry, Yes you can.. Atleast to a mobile number.. The setting is in the
latest software. Would be nice if you could set a landline number aswell. :)
>
> You can with voipcheap so it should be possible for voipdiscount. I know
> you have to do it all through the softphone (latest version) for it to work.
> If I remember correctly you need to set your mobile number in the personal
> settings box (taking care to enter in 00447 format), then verify the number
> and set as CLI. Could be that I have remembered it wrong. Doesn't work for
> landline numbers.
>
> Try searching the group as I think I contributed to an earlier thread on the
> subject.
I had my mobile # verified through softphone but it only shows up "From" in
SMSes, not when dialing from ATA. I use VoipCheapCom, VOIP GATEWAY 102
with "Caller ID Scheme" set to "ETSI-FSK(UK-CCA), "Send Anonymous"(If
"Yes", caller ID will be blocked) set to "No". My ID come as "UNAVAILABLE"
though.
"dmitri" <me@my.biz> wrote in message
news:eq81tu$rrm$1$8300dec7@news.demon.co.uk...
>>
>> You can with voipcheap so it should be possible for voipdiscount. I know
>> you have to do it all through the softphone (latest version) for it to
>> work.
>> If I remember correctly you need to set your mobile number in the
>> personal
>> settings box (taking care to enter in 00447 format), then verify the
>> number
>> and set as CLI. Could be that I have remembered it wrong. Doesn't work
>> for
>> landline numbers.
>>
>> Try searching the group as I think I contributed to an earlier thread on
>> the
>> subject.
>
> I had my mobile # verified through softphone but it only shows up "From"
> in
> SMSes, not when dialing from ATA. I use VoipCheapCom, VOIP GATEWAY 102
> with "Caller ID Scheme" set to "ETSI-FSK(UK-CCA), "Send Anonymous"(If
> "Yes", caller ID will be blocked) set to "No". My ID come as "UNAVAILABLE"
> though.
>
> Has anybody succeded?
As I said I got it to work via voipcheap com. Make sure your mobile number
appears as 00447.... and not as +447.... To do this you need to enter it
through the softphone, NOT on the web. If my memory serves me right, you
then just need to verify and set as caller ID and hey presto! It doesn't
seem to work all the time on calls to mobile numbers but no problem with
landlines.
In article <uctyh.3213$3a3.1512@newsfe6-win.ntli.net>,
"Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote:
(snipped)
>
> As I said I got it to work via voipcheap com. Make sure your mobile number
> appears as 00447.... and not as +447.... To do this you need to enter it
> through the softphone, NOT on the web. If my memory serves me right, you
> then just need to verify and set as caller ID and hey presto! It doesn't
> seem to work all the time on calls to mobile numbers but no problem with
> landlines.
Does it work with an ATA as well as on the softphone?
"Oldie" <realoldie@googlemail.com> wrote in message
news:realoldie-7EA30C.10462108022007@news.motzarella.org...
> In article <uctyh.3213$3a3.1512@newsfe6-win.ntli.net>,
> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote:
>
> (snipped)
>>
>> As I said I got it to work via voipcheap com. Make sure your mobile
>> number
>> appears as 00447.... and not as +447.... To do this you need to enter it
>> through the softphone, NOT on the web. If my memory serves me right, you
>> then just need to verify and set as caller ID and hey presto! It doesn't
>> seem to work all the time on calls to mobile numbers but no problem with
>> landlines.
>
> Does it work with an ATA as well as on the softphone?
>
> Oldie
Yes, but I believe you need to enter the number in the same format in one of
the fields in the registration information. I have a Fritzbox and I put it
in the Internet number box, and ticked the use internet number for
registration box. IIRC Linksys/Sipura terminology for these two fields is
AuthID and use AuthID.
Herman was thinking very hard :
> "Oldie" <realoldie@googlemail.com> wrote in message
> news:realoldie-7EA30C.10462108022007@news.motzarella.org...
>> In article <uctyh.3213$3a3.1512@newsfe6-win.ntli.net>,
>> "Herman" <whitehousemadhouse-2005@yahoo.co.uk> wrote:
>>
>> (snipped)
>>>
>>> As I said I got it to work via voipcheap com. Make sure your mobile
>>> number
>>> appears as 00447.... and not as +447.... To do this you need to enter it
>>> through the softphone, NOT on the web. If my memory serves me right, you
>>> then just need to verify and set as caller ID and hey presto! It doesn't
>>> seem to work all the time on calls to mobile numbers but no problem with
>>> landlines.
>>
>> Does it work with an ATA as well as on the softphone?
>>
>> Oldie
>
> Yes, but I believe you need to enter the number in the same format in one of
> the fields in the registration information. I have a Fritzbox and I put it
> in the Internet number box, and ticked the use internet number for
> registration box. IIRC Linksys/Sipura terminology for these two fields is
> AuthID and use AuthID.
Well, bugger me. Thank you for making me revisit this.
Herman has brought this to us :
> "Jono" <nothanks@blueyonder.invalid> wrote in message
> news:mn.4d5f7d72e35760b0.48968@blueyonder.invalid. ..
>
>> Well, bugger me.
>
> No thanks.
Well, it was more an exclamation than a request, anyway.
Next Question! 
Linear Mode
