OrbTalk - Sipgate Ports

Hi

I want to configure both OrbTalk and Sipagate on my PAP2 v1.

Can they both be set on the same ports.

They both seem to want to use port 5060

Thanks

Geoff

mortician wrote:
> Hi
>
> I want to configure both OrbTalk and Sipagate on my PAP2 v1.
>
> Can they both be set on the same ports.
>
> They both seem to want to use port 5060

Local SIP port is different to remote SIP port.

Remote - usually 5060

Local - by default is 5060 (line1) and 5061 (line2). There is never
normally any reason to change these.


Tim

Jono wrote:
> Am I missing something with the SPA, or is it likely that I'm stuck with
> 5060?


You are.

You specify the remote port in the Proxy setting, with a :.

For example, enter the proxy as 192.168.45.2:5070


Where it says Port: is actually the local SIP port.

Tim

Cheers Folks
"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.eada7d791b7ee917.48968@blueyonder.invalid. ..
> Tim expressed precisely :
>> Jono wrote:
>>> Am I missing something with the SPA, or is it likely that I'm stuck with
>>> 5060?
>>
>>
>> You are.
>>
>> You specify the remote port in the Proxy setting, with a :.
>>
>> For example, enter the proxy as 192.168.45.2:5070
>>
>>
>> Where it says Port: is actually the local SIP port.
>
> I did do that. Perhaps a flaw in the firmware then (Old Sipura firmware)
>
> Thanks.
>
>

Jono wrote:
>> Where it says Port: is actually the local SIP port.
>
> I did do that. Perhaps a flaw in the firmware then (Old Sipura firmware)

I've never known it not to work.

I can send you some newer firmware if you email me at work. I have
plenty in my collection.

Tim

Tim brought next idea :
> Jono wrote:
>>> Where it says Port: is actually the local SIP port.
>>
>> I did do that. Perhaps a flaw in the firmware then (Old Sipura firmware)
>
> I've never known it not to work.
>
> I can send you some newer firmware if you email me at work. I have plenty in
> my collection.

Cheers