Press # For VOIP Line

I have a Linksys SPA3102 and use VoipTalk for incoming calls and
VoipDiscount for outgoing. At the moment I have a separate phone for VOIP
calls and PSTN calls as my wife dislikes to use the VOIP system as any echo
irritates her. The echo is only minimal and mainly when she calls the far
east.

My calling plan is this

(<#,:>xx.<:@gw0>|<1471><:@gw0>|<:441625>xxxxxx<:@g w1>|01xx.<:@gw1>|02xx.<:@gw1>|00xx.<:@gw1>|08xx.<: @gw0>|999<:@gw0>|07xx.<:@gw0>)

To be honest I have never really understood it but built it up by asking
advice and cutting and pasting! it works fine.

At the moment calls via the VOIP phone go out via VOIP unless I press # in
which case they go out via PSTN. Is it possible to reverse this so that
calls by default go out via PSTN and if I press # go out via VOIP. This way
my wife would be happy and I could get rid of one of the phones on my desk
and use VOIP for my calls.

Mr Muffin Top wrote:
>
> My calling plan is this
>
> (<#,:>xx.<:@gw0>|<1471><:@gw0>|<:441625>xxxxxx<:@g w1>|01xx.<:@gw1>|02xx.<:@gw1>|00xx.<:@gw1>|08xx.<: @gw0>|999<:@gw0>|07xx.<:@gw0>)
>
>
> To be honest I have never really understood it but built it up by asking
> advice and cutting and pasting! it works fine.
>
> At the moment calls via the VOIP phone go out via VOIP unless I press #
> in which case they go out via PSTN. Is it possible to reverse this so
> that calls by default go out via PSTN and if I press # go out via VOIP.
> This way my wife would be happy and I could get rid of one of the phones
> on my desk and use VOIP for my calls.

Not checked, but something like this:

(<#,:>xx.<:@gw1>|0<:@gw0>)

Stuart Clark wrote:
>
> Not checked, but something like this:
>
> (<#,:>xx.<:@gw1>|0<:@gw0>)

Actually I think I meant:

(<#,:>xx.<:@gw1>|.<:@gw0>)

"Stuart Clark" <stuart.clark@Jahingo.com> wrote in message
news:08rqs4-mvi.ln1@stuart.Jahingo.com...
> Stuart Clark wrote:
>>
>> Not checked, but something like this:
>>
>> (<#,:>xx.<:@gw1>|0<:@gw0>)
>
> Actually I think I meant:
>
> (<#,:>xx.<:@gw1>|.<:@gw0>)

Thanx - I will give it a try

"Stuart Clark" <stuart.clark@Jahingo.com> wrote in message
news:08rqs4-mvi.ln1@stuart.Jahingo.com...
> Stuart Clark wrote:
>>
>> Not checked, but something like this:
>>
>> (<#,:>xx.<:@gw1>|0<:@gw0>)
>
> Actually I think I meant:
>
> (<#,:>xx.<:@gw1>|.<:@gw0>)

Ok - works - however with my old dialing plan if I dialed a local 6 digit
number via VOIP it added the area code to the number as
|<:441625>xxxxxx<:@gw1>|

If I add this back into the dialing plan you suggested
(<#,:>xx.<:@gw1>|.<:@gw0>|<:441625>xxxxxx<:@gw1>) Then if I dial a 6 figure
number on the phone it goes out via VOIP by default

Mr Muffin Top wrote:
> "Stuart Clark" <stuart.clark@Jahingo.com> wrote in message
> news:08rqs4-mvi.ln1@stuart.Jahingo.com...
>> Stuart Clark wrote:
>>>
>>> Not checked, but something like this:
>>>
>>> (<#,:>xx.<:@gw1>|0<:@gw0>)
>>
>> Actually I think I meant:
>>
>> (<#,:>xx.<:@gw1>|.<:@gw0>)
>
> Ok - works - however with my old dialing plan if I dialed a local 6
> digit number via VOIP it added the area code to the number as
>> <:441625>xxxxxx<:@gw1>|
>
> If I add this back into the dialing plan you suggested
> (<#,:>xx.<:@gw1>|.<:@gw0>|<:441625>xxxxxx<:@gw1>) Then if I dial a 6
> figure number on the phone it goes out via VOIP by default


Change the gw1 in <:441625>xxxxxx<:@gw1>) to @gw0 I believe gw0 is the PSTN.

"{{{{{Welcome}}}}}" <bhx_spam@trapped__hotmail.co.uk> wrote in message
news:7ETKi.21603$c_1.16735@text.news.blueyonder.co .uk...
> Mr Muffin Top wrote:
>> "Stuart Clark" <stuart.clark@Jahingo.com> wrote in message
>> news:08rqs4-mvi.ln1@stuart.Jahingo.com...
>>> Stuart Clark wrote:
>>>>
>>>> Not checked, but something like this:
>>>>
>>>> (<#,:>xx.<:@gw1>|0<:@gw0>)
>>>
>>> Actually I think I meant:
>>>
>>> (<#,:>xx.<:@gw1>|.<:@gw0>)
>>
>> Ok - works - however with my old dialing plan if I dialed a local 6
>> digit number via VOIP it added the area code to the number as
>>> <:441625>xxxxxx<:@gw1>|
>>
>> If I add this back into the dialing plan you suggested
>> (<#,:>xx.<:@gw1>|.<:@gw0>|<:441625>xxxxxx<:@gw1>) Then if I dial a 6
>> figure number on the phone it goes out via VOIP by default
>
>
> Change the gw1 in <:441625>xxxxxx<:@gw1>) to @gw0 I believe gw0 is the
> PSTN.

Thanks for the quick reply. Yes if I do that that 6 figure local numbers go
out via the PSTN - that is not the problem as it defaults to PSTN now so
they would anyway. I want to dial a 6 figure number and it go out via PSTN
by default but if I Press # and a 6 figure number it goes out via VOIP -
thanks for your help