RJ11 cable with ring capacitor

I bought my 486 ATA a few months ago. I connected an old Geemarc phone
to it with an RJ11 cable. I had no problems at all - the phone rang, and
I could make calls. I have since replaced the phone with a BT phone
using the same RJ11 cable - and I don't even get a dial tone. The phone
is 100% working on the BT line however. Through my own trouble shooting,
I've found that the Geemarc phone only works on the BT line using it's
own RJ11 - BT cable - and not with any other one (I tried 4 from various
phones / modems). Basically, I need an RJ11 cable that will make the BT
phone work with my ATA - what exactly am I looking for? The RJ11 cable I
used was just a standard RJ11 cable for ADSL - no ring capacitor.

If you are wondering why I have swapped phones - it's simply because
the Geemarc phone matches my newly decorated hall better than the BT
phone.


George

On Wed, 21 Sep 2005 23:48:08 +0100, "George"
<geodabass@hotORNOTmail.com> wrote:

>Basically, I need an RJ11 cable that will make the BT
>phone work with my ATA - what exactly am I looking for? The RJ11 cable I
>used was just a standard RJ11 cable for ADSL - no ring capacitor.

usually people leave the phone cable alone and put a BT socket to RJ11
plug adaptor into the ATA.

https://linitx.com/product_info.php?...roducts_id=679 for
example. Solwise is another source.

Phil
--

Usenet spam eaten by a Hamster http://www.tglsoft.de/
No more cable clowns :-))
Please do not feed or re-quote the trolls.