SPA3102 Volume Level on VOIP

Having a small problem with hearing people, and them hearing me, when
using the VOIP line. I have turned up the volume on the PSTN
connection successfully, but cannot work out how you turn up the
volume on the VOIP connection, can you help please.

> Having a small problem with hearing people, and them hearing me, when
> using the VOIP line. I have turned up the volume on the PSTN
> connection successfully, but cannot work out how you turn up the
> volume on the VOIP connection, can you help please.

I don't know if this helps, but on my PAP-2 in advanced view on
the reagonal tab, I have "FXS output gain"

--
Graham.

%Profound_observation%

On Sun, 26 Sep 2010 12:10:17 +0100, "Graham." <me@privacy.com> wrote:

>
>> Having a small problem with hearing people, and them hearing me, when
>> using the VOIP line. I have turned up the volume on the PSTN
>> connection successfully, but cannot work out how you turn up the
>> volume on the VOIP connection, can you help please.
>
>I don't know if this helps, but on my PAP-2 in advanced view on
>the reagonal tab, I have "FXS output gain"

Thanks Graham, but thats the setting I changed, and it seems only to
affect the PSTN volume.

(26/09/10 21:00), Anti-Spam:
> On Sun, 26 Sep 2010 12:10:17 +0100, "Graham."<me@privacy.com> wrote:
>
>>
>>> Having a small problem with hearing people, and them hearing me, when
>>> using the VOIP line. I have turned up the volume on the PSTN
>>> connection successfully, but cannot work out how you turn up the
>>> volume on the VOIP connection, can you help please.
>>
>> I don't know if this helps, but on my PAP-2 in advanced view on
>> the reagonal tab, I have "FXS output gain"
>
> Thanks Graham, but thats the setting I changed, and it seems only to
> affect the PSTN volume.
You might need to check you are using the right settings for the type of
landline you have.
I suggest you tune down the FXS output gain, and work with the "SPA to
PSTN Gain" and "PSTN to SPA gain" parameters.

Here's your "bible": http://tinyurl.com/2ckq2pd

A PDF directly from Cisco's deep end with an enormous amount of info and
guidance on many models of Linksys - Sipura ATAs.

Enjoy
--
Bodincus - The Y2K Druid
************************
Law 42 on computing:
Anything that could fail, will break at the worst possible mom%*= ?@@
# Access Violation - Core dumped
# Kernel Panic

On Tue, 28 Sep 2010 18:11:34 +0100, Bodincus <nobody@this.address>
wrote:

>(26/09/10 21:00), Anti-Spam:
>> On Sun, 26 Sep 2010 12:10:17 +0100, "Graham."<me@privacy.com> wrote:
>>
>>>
>>>> Having a small problem with hearing people, and them hearing me, when
>>>> using the VOIP line. I have turned up the volume on the PSTN
>>>> connection successfully, but cannot work out how you turn up the
>>>> volume on the VOIP connection, can you help please.
>>>
>>> I don't know if this helps, but on my PAP-2 in advanced view on
>>> the reagonal tab, I have "FXS output gain"
>>
>> Thanks Graham, but thats the setting I changed, and it seems only to
>> affect the PSTN volume.
>You might need to check you are using the right settings for the type of
>landline you have.
>I suggest you tune down the FXS output gain, and work with the "SPA to
>PSTN Gain" and "PSTN to SPA gain" parameters.
>
>Here's your "bible": http://tinyurl.com/2ckq2pd
>
>A PDF directly from Cisco's deep end with an enormous amount of info and
>guidance on many models of Linksys - Sipura ATAs.
>
>Enjoy

Thanks bud, will check it out.