SPA941

Hi,

I bought recently a SPA941. And I discovered that sometimes, when I make
a modifiation ia webpage, I "submit the change". Seems to be OK, but
after a while, I can see that the wrong configuration is back !!!!?!?!?!
again
I tried several times... and come back with the wrong configuration..

Any idea what can be this problem ?

I recetly upgrade the firmware -> 4.1.15 on the Hardware V 1.0.0(242c)
I did pay attention how was the behaviour before this upgrade...

Any help would be appreciate !

Thanks

Stephane

Stephane M wrote:
> Hi,
>
> I bought recently a SPA941. And I discovered that sometimes, when I make
> a modifiation ia webpage, I "submit the change". Seems to be OK, but
> after a while, I can see that the wrong configuration is back !!!!?!?!?!
> again
> I tried several times... and come back with the wrong configuration..
>
> Any idea what can be this problem ?
>
> I recetly upgrade the firmware -> 4.1.15 on the Hardware V 1.0.0(242c)
> I did pay attention how was the behaviour before this upgrade...
>
> Any help would be appreciate !

I think that behaviour indicates you have remote provisioning turned
on - I had same behaviour on 942's. Did you find the upgrade to 4.1.15
easy and did it fix any problems?

John P wrote:
> Stephane M wrote:
>
>> Hi,
>>
>> I bought recently a SPA941. And I discovered that sometimes, when I
>> make a modifiation ia webpage, I "submit the change". Seems to be OK,
>> but after a while, I can see that the wrong configuration is back
>> !!!!?!?!?! again
>> I tried several times... and come back with the wrong configuration..
>>
>> Any idea what can be this problem ?
>>
>> I recetly upgrade the firmware -> 4.1.15 on the Hardware V 1.0.0(242c)
>> I did pay attention how was the behaviour before this upgrade...
>>
>> Any help would be appreciate !
>
>
> I think that behaviour indicates you have remote provisioning turned on
> - I had same behaviour on 942's. Did you find the upgrade to 4.1.15 easy
> and did it fix any problems?
Hi John,

I found the problem. Effectively, there was a 'profile rule' set up
Seems to be OK now.

Concerning the firmware, I did upgrade because of the latest revision.
But I didn't find any problems with the previous version. ( I had the
phone since a couples of weeks)
I thought that to get the latest version could be better :-)

Thanks

Stephane