Thus spaketh Ivor Jones:
> "{{{{{Welcome}}}}}" <bhx___spam@trapped___hotmail.co.uk>
> wrote in message
> news:N0Aih.19834$k74.5297@text.news.blueyonder.co. uk
>> Thus spaketh Ian Pawson:
>>> I have been trying to set my ATA to give the UK style
>>> busy tone. The best I can manage is
>>> 400@-19,620@-19;10(.3/.6/1+2) but this is still not
>>> correct. Any advice on the correct setting please? Cheers, Ian
>>
>>
>> 400@-10;30(.375/.375/1)
>
> Thanks here also. Do you have a link or file with the full range of UK
> settings..? Mine is a SPA-2000 if there are any differences.
>
>
> Ivor
Dial Tone: 350@-19,440@-22;60(*/0/1+2)
Second Dial Tone: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 400@-10;30(.375/.375/1)
Reorder Tone: 400@-20;20(*/0/1)
Off Hook Warning Tone: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone: 400@-20,450@-20;*(.4/.2/1+2,.4/2/1+2)
Confirm Tone: 600@-16;1(.25/.25/1)
SIT1 Tone:
950@-16,1400@-16,1800@-16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0)
SIT2 Tone:
914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone:
914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone:
985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
MWI Dial Tone: 350@-19,440@-22;10(.75/.75/1+2)
Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
DND Dial Tone: 350@-19,440@-19;2(.2/.2/2);10(*/0/1+2)
Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone: 350@-16;*(.1/.1/1)
Ring 1 Cadence: 60(.4/.2,.4/2)
Ring 2 Cadence (BT Call Sign): 60(1/2)
Ring 3 Cadence (BT Ring Back): 60(.25/.25,.25/.25,.25/1.75)
Ring 4 Cadence: 60(.4/.8)
Ring 5 Cadence: 60(2/4)
Ring6 Cadence: 60(.2/.4,.2/.4,.2/4)
Ring7 Cadence: 60(.4/.2,.4/.2,.4/4)
Ring8 Cadence: 60(0.3/9.7)
The last few Ring Cadence settings are just ones I was testing.
CWT1 Cadence: 51(.1/5)
CWT2 Cadence: 30(.25/.25,.25/.25,.25/5)
CWT3 Cadence: 30(.1/.1, .3/.1, .1/9.3)
CWT4 Cadence: 30(.1/.1,.1/.1,.1/9.5)
CWT5 Cadence: 30(.3/.1,.1/.1,.3/9.1)
CWT6 Cadence: 30(.1/.1,.3/.2,.3/9.1)
CWT7 Cadence: 30(.3/.1,.3/.1,.1/9.1)
CWT8 Cadence: 2.3(.3/2)
(CWT, these are personal settings, I only use the first one).
Ring Waveform: Sinusoid
Ring Frequency: 25
Ring Voltage: 70
CWT Frequency: 400@-10 (A setting I felt comfortable
with).
Synchronized Ring: YES
Hook Flash Timer Min: .06
Hook Flash Timer Max: .2
Callee On Hook Delay: 0
Reorder Delay: 5
Call Back Expires: 1800
Call Back Retry Intvl: 30
Call Back Delay: .5
VMWI Refresh Intvl: 0
Interdigit Long Timer: 10
Interdigit Short Timer: 3
CPC Delay: .5
CPC Duration: .1
FXS Port Impedance: 370+620||310nF
Daylight Saving Time Rule:
start=3/-1/7/2:0:0;end=10/-1/7/2:0:0;save=1:0:0
FXS Port Input Gain: 0
FXS Port output Gain: 0
DTMF Playback Level: -16
DTMF Playback Length: .25
Caller ID Method: ETSI FSK With PR(UK)
Caller ID FSK Standard: V.23
FXS Port Power Limit: 3
Feature Invocation Method: Default
More Echo Suppression: YES
I remember getting some of the details from:
http://forum.voxilla.com/linksys-sip...red-13936.html
and
http://www.sipgate.co.uk/faq/index.p...ces&rubrik=630
Though some I may have modified, such as extending the busy tone to
sound for 30 seconds and extending the dial tone to sound for 60 seconds
before giving the off-hook warning.
These are taken from my PAP2, but I believe the settings are the same
for the SPA devices.
--
60 day free DVD rental:
www.southeastbirmingham.co.uk/dvd 
UK Busy tone on an SPA-3000? 
Linear Mode
