voipbuster

#1 (**permalink**) 08-11-2005, 05:27 PM

Hi,
Does anyone knows when the voipbuster (www.voipbuster.com) service will
be up again? I have downloaded the software but cannot register.
Thanks for any hint G

#2 (**permalink**) 08-12-2005, 01:04 AM

It is probaly the volume of fREE users, word is out, users probaly
exceed capacity

#3 (**permalink**) 08-12-2005, 11:45 AM

At the moment I am getting poor results. Big echo on the sound reported.
Last week it was good, very good. This week it's crap, can't run a bussiness
with this level of performance. Staying with conventional BT land line for
now.

John DH

JuliusP" <julius@brampton.net> wrote in message
news:1123808691.932452.105680@z14g2000cwz.googlegr oups.com...
> It is probaly the volume of fREE users, word is out, users probaly
> exceed capacity
>

#4 (**permalink**) 08-12-2005, 02:12 PM

On Fri, 12 Aug 2005 12:45:05 +0100, "John D"
<nospamjohn@celticgods.co.uknspam> wrote:

>At the moment I am getting poor results. Big echo on the sound reported.
>Last week it was good, very good. This week it's crap, can't run a bussiness
>with this level of performance. Staying with conventional BT land line for
>now.
>
>John DH

It works very well indeed with an ATA. My ATA is built into my router
so there are no extra boxes lying around either.

Me

#5 (**permalink**) 08-12-2005, 02:23 PM

Me wrote:
> On Fri, 12 Aug 2005 12:45:05 +0100, "John D"
> <nospamjohn@celticgods.co.uknspam> wrote:
>
>
>>At the moment I am getting poor results. Big echo on the sound reported.
>>Last week it was good, very good. This week it's crap, can't run a bussiness
>>with this level of performance. Staying with conventional BT land line for
>>now.
>>
>>John DH
>
>
> It works very well indeed with an ATA. My ATA is built into my router
> so there are no extra boxes lying around either.
>
> Me
>
what settings do you use? I've never managed to get it to work with my
Draytek 2600VGi

#6 (**permalink**) 08-12-2005, 10:31 PM

>what settings do you use? I've never managed to get it to work with my
>Draytek 2600VGi

Only a couple of settings really

The SIP Registrar Address is set to stun.voipbuster.com and then I put
in my username and password. Sorted!

Me

#7 (**permalink**) 08-13-2005, 07:45 AM

In message of Fri, 12 Aug 2005, Me writes
>
>>what settings do you use? I've never managed to get it to work with my
>>Draytek 2600VGi
>
>Only a couple of settings really
>
>The SIP Registrar Address is set to stun.voipbuster.com and then I put
>in my username and password. Sorted!
>

For a STUN setting you can use any STUN address!

David

#8 (**permalink**) 08-13-2005, 08:14 AM

Me wrote:
>>what settings do you use? I've never managed to get it to work with my
>>Draytek 2600VGi
>
>
> Only a couple of settings really
>
> The SIP Registrar Address is set to stun.voipbuster.com and then I put
> in my username and password. Sorted!
>
> Me
I am reading this right? - you set the SIP Registrar to
stun.voipbuster.com and NOT voipbuster.com. Doesn't work for me - could
you post all of your settings please?

Thanks.

#9 (**permalink**) 08-13-2005, 09:23 AM

David, that was NOT a stun server setting

It was the registrar address setting as sip.voipbuster.com and
voipbuster.com did not work.

I read about someone else who had used stun.voipbuster.com So tried it
- and it worked - and still does

Me

On Sat, 13 Aug 2005 08:45:53 +0100, David Floyd <david@floyd.org.uk>
wrote:

>In message of Fri, 12 Aug 2005, Me writes
>>
>>>what settings do you use? I've never managed to get it to work with my
>>>Draytek 2600VGi
>>
>>Only a couple of settings really
>>
>>The SIP Registrar Address is set to stun.voipbuster.com and then I put
>>in my username and password. Sorted!
>>
>
>For a STUN setting you can use any STUN address!
>
>David

#10 (**permalink**) 08-13-2005, 09:24 AM

Yes you read correct as voipbuster.com and sip.voipbuster.com Did not
work.

As I said in my earlier email there are no other settings on my router
- apart from the port which I left at the SIP default of 5060

Me

On Sat, 13 Aug 2005 09:14:37 +0100, Anon Y Mous <..@..> wrote:

>Me wrote:
>>>what settings do you use? I've never managed to get it to work with my
>>>Draytek 2600VGi
>>
>>
>> Only a couple of settings really
>>
>> The SIP Registrar Address is set to stun.voipbuster.com and then I put
>> in my username and password. Sorted!
>>
>> Me
>I am reading this right? - you set the SIP Registrar to
>stun.voipbuster.com and NOT voipbuster.com. Doesn't work for me - could
>you post all of your settings please?
>
>Thanks.

#11 (**permalink**) 08-13-2005, 10:54 AM

gg
"Me" <me@me.me> wrote in message
news:j0frf1pe15jqo8t138ei79lqdu00c813v4@4ax.com...
> Yes you read correct as voipbuster.com and sip.voipbuster.com Did not
> work.
>
> As I said in my earlier email there are no other settings on my router
> - apart from the port which I left at the SIP default of 5060
>
> Me
>
>
>
>
> On Sat, 13 Aug 2005 09:14:37 +0100, Anon Y Mous <..@..> wrote:
>
>>Me wrote:
>>>>what settings do you use? I've never managed to get it to work with my
>>>>Draytek 2600VGi
>>>
>>>
>>> Only a couple of settings really
>>>
>>> The SIP Registrar Address is set to stun.voipbuster.com and then I put
>>> in my username and password. Sorted!
>>>
>>> Me
>>I am reading this right? - you set the SIP Registrar to
>>stun.voipbuster.com and NOT voipbuster.com. Doesn't work for me - could
>>you post all of your settings please?
>>
>>Thanks.
>

#12 (**permalink**) 08-13-2005, 11:56 AM

Me wrote:
> Yes you read correct as voipbuster.com and sip.voipbuster.com Did not
> work.
>
> As I said in my earlier email there are no other settings on my router
> - apart from the port which I left at the SIP default of 5060
>
> Me

I'll give it another shot. Thanks.