TheFug wrote:
> Sinna schreef:
>> Oldie wrote:
>>> In article <5lbuc9F7bmprU1@mid.individual.net>,
>>> Sinna <news4sinna_NOSPAM@hotpop.com> wrote:
>>>
>>>> Philippe Deleye wrote:
>>>>> I'm using the FritzBox with Voipcheap for outgoing calls
>>>>> I have registered my landline caller-id (format 003256xxxx) with
>>>>> Voipcheap
>>>>> client.
>>>>> This worked for many months now ....
>>>> I suggest you try to verify your land-line phone number again. I did
>>>> recently to enable CallerID on my Linksys SPA 3102 and it works like
>>>> a charm.
>>>
>>> I can confirm this. I had the same problem with Voipdiscount and when
>>> I checked the client the verifications had gone. I re-verified and
>>> now Caller ID now works well from my ATA and also via Voxalot. Seems
>>> as if you to have to check it regularly.
>>>
>>> I haven't worked out the timing but it could be related to the
>>> top-up. When you think about it there is a logic in it because you
>>> could well have moved and lost your true number at some stage. Would
>>> be nice to have a reminder though.
>>>
>>> Oldie
>> Perhaps you post a message in their forum suggesting this reminder.
>> Would be very helpful sometimes.
>> In the meanwhile getting a notification of running out of credit would
>> be welcome too, especially if you're using their service with a
>> SIP-enabled device instead of their client.
>>
>> Sinna
>
> About the Caller ID issue: i now notice it works better for the
> recognition of the incomming PTSN CID, when i use DTMF (Finland, Sweden)
> But that could also because it's a cheap DECT phone, MAX200,
> What's the official dialing method of the Netherlands exactly ?
> Another thing, people with an "hidden/secret" telephone number, can also
> setup a SIP account at a ITSP ? no CID naturaly...
>
>
Yes, they can, as it is not required to have a telephone number to be
able to dial. It is even possible to send your mobile number as CallerID
for your fixed line...
TheFug wrote:
> Sinna schreef:
>> TheFug wrote:
>>> Sinna schreef:
>>>> TheFug wrote:
>>>>> Sinna schreef:
>>>>> > I suggest you try to verify your land-line phone number again. I
>>>>> did
>>>>>> recently to enable CallerID on my Linksys SPA 3102 and it works
>>>>>> like a charm.
>>>>>>
>>>>>
>>>>> How did you set these settings ? i too have a SPA3102, and also
>>>>> registerd my own phonenumber on cheap & buster
>>>>>
>>>>>
>>>> Step-by-step guide: ;)
>>>> - Log in as Administrator
>>>> - Switch to Voice Line 1 tab
>>>> - Enter something in the 'Display Name' field (it doesn't matter, I
>>>> didn't figure out where it's displayed anyhow/anyway)
>>>> - Enter your phone-number in the 'User ID' field in the
>>>> +32xxxxxxxx-format (32 is Belgium)
>>>> - Enter your password in the 'Password' field (obvious)
>>>> - Set 'Use Auth ID' to 'yes'
>>>> - Enter your VoipCheap/VoipBuster UserID in the 'Auth ID' field
>>>> - apply the changes, let the gateway reboot and start calling.
>>>> - you can verify it by calling yourself on your cellphone.
>>>>
>>>> Note that I verified my phonenumber also in the +32xxxxxxxx-format.
>>>> Perhaps it's related to each other, but I'm not sure.
>>>>
>>>> Hope this helps,
>>>>
>>>> Sinna
>>>
>>> Yes ! it works ! Thankyou veeeeeeery much !
>>>
>>>
>> No prob - Graag gedaan.
>>
>> It was quite difficult to get it working, but when combining the
>> knowledge of several people trying to accomplish it, it usually works.
>> The only thing left is to create a step-by-step guide to serve those
>> who want the same.
>> I hope this tutorial will be useful for many people. When using
>> Google, they'll surely find this message.
>>
>> Have a nice weekend,
>> Sinna
>
> Yep, but it's also a question of keywords and terms, your step by step
> guide does realy a good job, a lot of users already searched for this,
> but got, until now, no clear answer for it.
> As a first time user, of the SPA3102, you get a shock, when you see how
> much things you can set....when i got my answer from you, i first did a
> factory reset, thru the dial **** menu, and then followed the step by
> step guide, i only changed from VoipCheap.com to VoipBuster, and i
> notice that Caller ID works better now, with VoipCheap it didn't work
> every time correctly..
>
Strange, I'm using VoipCheap as it is cheaper to call mobile phones
(12ct/min instead of 20ct/min), and my girlfriend never complained
(yet?) my phone number was not revealed (my girlfriend is the only one I
call on the cellphone ;) ).
Sinna schreef:
> TheFug wrote:
>> Sinna schreef:
>>> TheFug wrote:
>>>> Sinna schreef:
>>>>> TheFug wrote:
>>>>>> Sinna schreef:
>>>>>> > I suggest you try to verify your land-line phone number again.
>>>>>> I did
>>>>>>> recently to enable CallerID on my Linksys SPA 3102 and it works
>>>>>>> like a charm.
>>>>>>>
>>>>>>
>>>>>> How did you set these settings ? i too have a SPA3102, and also
>>>>>> registerd my own phonenumber on cheap & buster
>>>>>>
>>>>>>
>>>>> Step-by-step guide: ;)
>>>>> - Log in as Administrator
>>>>> - Switch to Voice Line 1 tab
>>>>> - Enter something in the 'Display Name' field (it doesn't matter, I
>>>>> didn't figure out where it's displayed anyhow/anyway)
>>>>> - Enter your phone-number in the 'User ID' field in the
>>>>> +32xxxxxxxx-format (32 is Belgium)
>>>>> - Enter your password in the 'Password' field (obvious)
>>>>> - Set 'Use Auth ID' to 'yes'
>>>>> - Enter your VoipCheap/VoipBuster UserID in the 'Auth ID' field
>>>>> - apply the changes, let the gateway reboot and start calling.
>>>>> - you can verify it by calling yourself on your cellphone.
>>>>>
>>>>> Note that I verified my phonenumber also in the +32xxxxxxxx-format.
>>>>> Perhaps it's related to each other, but I'm not sure.
>>>>>
>>>>> Hope this helps,
>>>>>
>>>>> Sinna
>>>>
>>>> Yes ! it works ! Thankyou veeeeeeery much !
>>>>
>>>>
>>> No prob - Graag gedaan.
>>>
>>> It was quite difficult to get it working, but when combining the
>>> knowledge of several people trying to accomplish it, it usually
>>> works. The only thing left is to create a step-by-step guide to serve
>>> those who want the same.
>>> I hope this tutorial will be useful for many people. When using
>>> Google, they'll surely find this message.
>>>
>>> Have a nice weekend,
>>> Sinna
>>
>> Yep, but it's also a question of keywords and terms, your step by
>> step guide does realy a good job, a lot of users already searched for
>> this, but got, until now, no clear answer for it.
>> As a first time user, of the SPA3102, you get a shock, when you see
>> how much things you can set....when i got my answer from you, i first
>> did a factory reset, thru the dial **** menu, and then followed the
>> step by step guide, i only changed from VoipCheap.com to VoipBuster,
>> and i notice that Caller ID works better now, with VoipCheap it didn't
>> work every time correctly..
>>
> Strange, I'm using VoipCheap as it is cheaper to call mobile phones
> (12ct/min instead of 20ct/min), and my girlfriend never complained
> (yet?) my phone number was not revealed (my girlfriend is the only one I
> call on the cellphone ;) ).
>
> Sinna
Oops, i didn't know the price difference, VoipBuster is Dutch/German
based, VoipCheap is USA based, but that can't be the reason, of my
landline in CID "effect".. (Dollar is also cheap i guess)
Sometimes, when i call in with my GSM on my landline, the Dutch voice
claims my number doesn't exists, while i hear my landline phone
ringing.. i guess all that VoIPing confuses those (KPN) switchboards...
btw. i'll set VoipCheap on gw1, and hope my CID doesn't dissappear, on
VoipBuster on outgoing calls.. but... you can actualy register one SIP,
and fill-in/use another on gw1 ?
So there's a difference in SIP providers, some don't registration, in de
Subscriber Information collum, on the LINE1 tab page ? (admin
advanced) (SPA3102)
Sinna schreef:
> TheFug wrote:
>> Sinna schreef:
>>> TheFug wrote:
>>>> Sinna schreef:
>>>>> TheFug wrote:
>>>>>> Sinna schreef:
>>>>>> > I suggest you try to verify your land-line phone number again.
>>>>>> I did
>>>>>>> recently to enable CallerID on my Linksys SPA 3102 and it works
>>>>>>> like a charm.
>>>>>>>
>>>>>>
>>>>>> How did you set these settings ? i too have a SPA3102, and also
>>>>>> registerd my own phonenumber on cheap & buster
>>>>>>
>>>>>>
>>>>> Step-by-step guide: ;)
>>>>> - Log in as Administrator
>>>>> - Switch to Voice Line 1 tab
>>>>> - Enter something in the 'Display Name' field (it doesn't matter, I
>>>>> didn't figure out where it's displayed anyhow/anyway)
>>>>> - Enter your phone-number in the 'User ID' field in the
>>>>> +32xxxxxxxx-format (32 is Belgium)
>>>>> - Enter your password in the 'Password' field (obvious)
>>>>> - Set 'Use Auth ID' to 'yes'
>>>>> - Enter your VoipCheap/VoipBuster UserID in the 'Auth ID' field
>>>>> - apply the changes, let the gateway reboot and start calling.
>>>>> - you can verify it by calling yourself on your cellphone.
>>>>>
>>>>> Note that I verified my phonenumber also in the +32xxxxxxxx-format.
>>>>> Perhaps it's related to each other, but I'm not sure.
>>>>>
>>>>> Hope this helps,
>>>>>
>>>>> Sinna
>>>>
>>>> Yes ! it works ! Thankyou veeeeeeery much !
>>>>
>>>>
>>> No prob - Graag gedaan.
>>>
>>> It was quite difficult to get it working, but when combining the
>>> knowledge of several people trying to accomplish it, it usually
>>> works. The only thing left is to create a step-by-step guide to serve
>>> those who want the same.
>>> I hope this tutorial will be useful for many people. When using
>>> Google, they'll surely find this message.
>>>
>>> Have a nice weekend,
>>> Sinna
>>
>> Yep, but it's also a question of keywords and terms, your step by
>> step guide does realy a good job, a lot of users already searched for
>> this, but got, until now, no clear answer for it.
>> As a first time user, of the SPA3102, you get a shock, when you see
>> how much things you can set....when i got my answer from you, i first
>> did a factory reset, thru the dial **** menu, and then followed the
>> step by step guide, i only changed from VoipCheap.com to VoipBuster,
>> and i notice that Caller ID works better now, with VoipCheap it didn't
>> work every time correctly..
>>
> Strange, I'm using VoipCheap as it is cheaper to call mobile phones
> (12ct/min instead of 20ct/min), and my girlfriend never complained
> (yet?) my phone number was not revealed (my girlfriend is the only one I
> call on the cellphone ;) ).
>
> Sinna
Oops, i didn't know the price difference, VoipBuster is Dutch/German
based, VoipCheap is USA based, but that can't be the reason, of my
landline in CID "effect".. (Dollar is also cheap i guess)
Sometimes, when i call in with my GSM on my landline, the Dutch voice
claims my number doesn't exists, while i hear my landline phone
ringing.. i guess all that VoIPing confuses those (KPN) switchboards...
btw. i'll set VoipCheap on gw1, and hope my CID doesn't dissappear, on
VoipBuster on outgoing calls.. but... you can actualy register one SIP,
and fill-in/use another on gw1 ?
So there's a difference in SIP providers, some don't need registration,
in de Subscriber Information collum, on the LINE1 tab page ? (admin
advanced) (SPA3102)
TheFug wrote:
> Sinna schreef:
>> TheFug wrote:
>>> Sinna schreef:
>>>> TheFug wrote:
>>>>> Sinna schreef:
>>>>>> TheFug wrote:
>>>>>>> Sinna schreef:
>>>>>>> > I suggest you try to verify your land-line phone number again.
>>>>>>> I did
>>>>>>>> recently to enable CallerID on my Linksys SPA 3102 and it works
>>>>>>>> like a charm.
>>>>>>>>
>>>>>>>
>>>>>>> How did you set these settings ? i too have a SPA3102, and also
>>>>>>> registerd my own phonenumber on cheap & buster
>>>>>>>
>>>>>>>
>>>>>> Step-by-step guide: ;)
>>>>>> - Log in as Administrator
>>>>>> - Switch to Voice Line 1 tab
>>>>>> - Enter something in the 'Display Name' field (it doesn't matter,
>>>>>> I didn't figure out where it's displayed anyhow/anyway)
>>>>>> - Enter your phone-number in the 'User ID' field in the
>>>>>> +32xxxxxxxx-format (32 is Belgium)
>>>>>> - Enter your password in the 'Password' field (obvious)
>>>>>> - Set 'Use Auth ID' to 'yes'
>>>>>> - Enter your VoipCheap/VoipBuster UserID in the 'Auth ID' field
>>>>>> - apply the changes, let the gateway reboot and start calling.
>>>>>> - you can verify it by calling yourself on your cellphone.
>>>>>>
>>>>>> Note that I verified my phonenumber also in the
>>>>>> +32xxxxxxxx-format. Perhaps it's related to each other, but I'm
>>>>>> not sure.
>>>>>>
>>>>>> Hope this helps,
>>>>>>
>>>>>> Sinna
>>>>>
>>>>> Yes ! it works ! Thankyou veeeeeeery much !
>>>>>
>>>>>
>>>> No prob - Graag gedaan.
>>>>
>>>> It was quite difficult to get it working, but when combining the
>>>> knowledge of several people trying to accomplish it, it usually
>>>> works. The only thing left is to create a step-by-step guide to
>>>> serve those who want the same.
>>>> I hope this tutorial will be useful for many people. When using
>>>> Google, they'll surely find this message.
>>>>
>>>> Have a nice weekend,
>>>> Sinna
>>>
>>> Yep, but it's also a question of keywords and terms, your step by
>>> step guide does realy a good job, a lot of users already searched for
>>> this, but got, until now, no clear answer for it.
>>> As a first time user, of the SPA3102, you get a shock, when you see
>>> how much things you can set....when i got my answer from you, i first
>>> did a factory reset, thru the dial **** menu, and then followed the
>>> step by step guide, i only changed from VoipCheap.com to VoipBuster,
>>> and i notice that Caller ID works better now, with VoipCheap it
>>> didn't work every time correctly..
>>>
>> Strange, I'm using VoipCheap as it is cheaper to call mobile phones
>> (12ct/min instead of 20ct/min), and my girlfriend never complained
>> (yet?) my phone number was not revealed (my girlfriend is the only one
>> I call on the cellphone ;) ).
>>
>> Sinna
>
> Oops, i didn't know the price difference, VoipBuster is Dutch/German
> based, VoipCheap is USA based, but that can't be the reason, of my
> landline in CID "effect".. (Dollar is also cheap i guess)
> Sometimes, when i call in with my GSM on my landline, the Dutch voice
> claims my number doesn't exists, while i hear my landline phone
> ringing.. i guess all that VoIPing confuses those (KPN) switchboards...
>
> btw. i'll set VoipCheap on gw1, and hope my CID doesn't dissappear, on
> VoipBuster on outgoing calls.. but... you can actualy register one SIP,
> and fill-in/use another on gw1 ?
> So there's a difference in SIP providers, some don't registration, in de
> Subscriber Information collum, on the LINE1 tab page ? (admin
> advanced) (SPA3102)
>
AFAIK VoipBuster, VoipCheap and others are all clones of the german
Betamax company. To compare prices, go to http://www.backsla.sh/betamax.
Note however that not all clones support the SIP-protocol!
>>> But that's a web based service ? or isn't it ?
>>> how do you "integrate" that ? could you give an example ?
>>
>> Brian A has a detailed site explaining all things SPA3XXX/Voxalot, however,
>> his site seems to have disappeared.
Brian A has now put his site back up. Some very useful SPA info on it.
Jono schreef:
> TheFug pretended :
>
>>>> But that's a web based service ? or isn't it ?
>>>> how do you "integrate" that ? could you give an example ?
>>>
>>> Brian A has a detailed site explaining all things SPA3XXX/Voxalot,
>>> however, his site seems to have disappeared.
>
> Brian A has now put his site back up. Some very useful SPA info on it.
>
> <http://www.leafcom.co.uk/>
>
>
Oldie schreef:
> In article <5lbuc9F7bmprU1@mid.individual.net>,
> Sinna <news4sinna_NOSPAM@hotpop.com> wrote:
>
>> Philippe Deleye wrote:
>>> I'm using the FritzBox with Voipcheap for outgoing calls
>>> I have registered my landline caller-id (format 003256xxxx) with Voipcheap
>>> client.
>>> This worked for many months now ....
>> I suggest you try to verify your land-line phone number again. I did
>> recently to enable CallerID on my Linksys SPA 3102 and it works like a
>> charm.
>
> I can confirm this. I had the same problem with Voipdiscount and when I
> checked the client the verifications had gone. I re-verified and now
> Caller ID now works well from my ATA and also via Voxalot. Seems as if
> you to have to check it regularly.
>
> I haven't worked out the timing but it could be related to the top-up.
> When you think about it there is a logic in it because you could well
> have moved and lost your true number at some stage. Would be nice to
> have a reminder though.
>
> Oldie
Same story here also, CID works fine with my 3102, but now with my Dutch
analog phone proivider, when i call my landline, afther 8 or ten rings
the switchboard voice says that my telephone number doesn't exists, and
i have to check it, or try later, sometimes it's also an in American
with also typical (US)acsent sounding voice, confused switchboards ?
very strange....
"TheFug" <nosp@mplea.ze> wrote in message
news:47012d9a$0$13746$ba620dc5@text.nova.planet.nl ...
> Oops, i didn't know the price difference, VoipBuster is Dutch/German
> based, VoipCheap is USA based, but that can't be the reason, of my
> landline in CID "effect".. (Dollar is also cheap i guess)
What do you mean with "Dutch/German based or USA based" ??
All Betamax clones are using exatly the same server ... just with different
names...
They all behave exatly the same way (some features depending on the country
you used during registration)
"TheFug" <nosp@mplea.ze> wrote in message
news:47012d9a$0$13746$ba620dc5@text.nova.planet.nl ...
> Oops, i didn't know the price difference, VoipBuster is Dutch/German
> based, VoipCheap is USA based, but that can't be the reason, of my
> landline in CID "effect".. (Dollar is also cheap i guess)
What do you mean with "Dutch/German based or USA based" ??
All Betamax clones are using exatly the same server ... just with different
names...
They all behave exatly the same way (some features depending on the country
you used during registration)
Re: Voipcheap & caller-id (FritzBox) 
Linear Mode
